| Wheelbase | 12.1ft in |
|---|---|
| Ground Clearance | 1.6ft in |
| Height - Top Of Hood | 10.4ft in |
| Wheel Base | 12.1ft in |
| Length - With Blade On Ground | 28.1ft in |
| Ground Clearance - Bumper | 2.7ft in |
| Height - Rops/Canopy | 13.3ft in |
| Height - Top Of Beacon | 14.4ft in |
| Height - Top Of Exhaust Pipe | 14.1ft in |
| Width Over Wheels | 11.98ft in |
| Engine Make | 2236 |
| Gross Power | 435hp |
| Net Power | 405hp |
| Displacement | 927.6cu in |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
| Engine Model | Cat C15 ACERT |
| Maximum Net Torque - 1,300 Rpm | 1478.8lb ft |
| High Idle Speed | 2300rpm |
| Low Idle Speed | 800rpm |
| Rated Power (Net Iso 9249) | 405hp |
| Rated Power (Net Sae J1349) | 405hp |
| Operating Weight | 78326lb |
| Fuel Capacity | 206.6gal |
| Transmission Type | Planetary Powershift ECPC |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Travel Speeds - Forward - First | 3.4mph |
| Travel Speeds - Reverse - First | 3.9mph |
| Travel Speeds - Forward - Third | 10.7mph |
| Travel Speeds - Reverse - Third | 12.2mph |
| Outside Diameter | 5.5ft in |
| Drum Diameter | 4.3ft in |
| Drum Width | 3.7ft in |
| Tips Per Wheel | 65 |
| Weight | 16167lb |
| Width - Over Drums | 12ft in |
| Front | Planetary-Fixed |
| Rear | Planetary Oscillating |
| Oscillation Angle | 8 degrees |
| Maximum Supply Pressure | 3495 psi |
| Main Relief Pressure | 3495 psi |
| Pump Flow At 1,800 Rpm | 30.9 gal/min |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
| Cooling System | 30.6gal |
| Fuel Tank | 206.6gal |
| Engine Crankcase | 9gal |
| Transmission | 17.4gal |
| Hydraulic Tank Only | 35.4gal |
| Steering System - Circuit | Double Acting – End Mounted |
| Steering System - Pump | Piston, variable displacement |
| Steering Pressure Limited | 3481 psi |
| Bore | 4.5in |
| Stroke | 22.7in |
| Maximum System Flow | 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) |
| Vehicle Articulation Angle | 86 degrees |
| Moldboard Length | 14.4ft in |
| Maximum Depth Of Cut | 2ft in |
| Maximum Lift Above Ground | 3.2ft in |
| Width - Over End Bits | 15.2ft in |
| Total Tilt Adjustment | 2.9ft in |
| Operator Sound Level (Iso 6396) | 72 dB(A) |
| Machine Sound Level (Iso 6395) | 110 dB(A) |
