| Length - With Blade On Ground | 27.34ft in |
|---|---|
| Ground Clearance | 1.61ft in |
| Height To Top Of Cab | 13.76ft in |
| Wheelbase | 12.14ft in |
| Width Over Wheels | 12.5ft in |
| Turning Radius - Inside | 10.57ft in |
| Turning Radius - Outside | 24.06ft in |
| Width - Over End Bits - Blade | 14.77ft in |
| Engine Make | 2236 |
| Gross Power | 401hp |
| Net Power | 354hp |
| Displacement | 927.6cu in |
| Torque Rise | 19% |
| Bore | 5.4in |
| Stroke | 6.7in |
| Engine Model | Cat C15 ACERT |
| Flywheel Power | 354hp |
| Peak Torque - Gross | 1387lb ft |
| Fuel Capacity | 177.6gal |
| Engine Oil Capacity | 9gal |
| Cooling System Fluid Capacity | 21.7gal |
| Transmission Fluid Capacity | 16.4gal |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed | 6.6mph |
| Forward - 1 | 3.6mph |
| Forward - 2 | 6.1mph |
| Reverse - 1 | 4.1mph |
| Reverse - 2 | 6.6mph |
| Front Wheels Drum Width | 47.3in |
| Operating Weight | 81498lb |
| Front Wheels Drum Diameter | 60.4in |
| Rear Wheels Drum Width | 47.3in |
| Rear Wheels Drum Diameter | 60.4in |
| Blade Capacity | 17.1yd3 |
| Width | 14.8ft in |
| Front | Planetary-Fixed |
| Lift Cylinder Bore X Stroke | 120.65 mm 915 mm (4.74 in 36.02 in) |
| Oscillating Rear | 5 degrees |
| Cooling System | 21.7gal |
| Fuel Tank | 177.6gal |
| Crankcase | 9gal |
| Hydraulic Tank | 23.3gal |
| Transmission | 16.4gal |
| Rops/Fops | Meets SAE and ISO standards |
| Standards | Meet ANSI/SAE and ISO standards |
| Moldboard Length | 14.2ft in |
| Drum Width | 4ft in |
| Drum Diameter | 5.1ft in |
| Blades Per Wheel | 24 |
| Diameter - With Blades | 6.1ft in |
| Relief Valve Setting | 3499 psi |
| Steering Angle | 42 degrees |
| Diameter - With Tips | 6.2ft in |
| Tips Per Wheel | 30 |
| Moldboard - Semi U-Length | 1.6ft in |
| Semi U-Angle | 25 degrees |
| Capacity | 21.9yd3 |
| Height | 6.9ft in |
| Width - Over End Bits | 14.5ft in |
| Moldboard - Straight Length | 6.9ft in |
| Moldboard - U-Length | 4.1ft in |
| U-Angle | 25 degrees |
