| Ground Contact Area - Lgp | 4425in2 |
|---|---|
| Ground Contact Area - Xl | 3206in2 |
| Ground Pressure - Lgp | 4.24 psi |
| Ground Pressure - Xl | 5.6 psi |
| Length - Track On Ground - Lgp | 89in |
| Length - Track On Ground - Xl | 89in |
| Shoe Width - Lgp | 25in |
| Shoe Width - Xl | 18in |
| Track Gauge - Lgp | 68in |
| Track Gauge - Xl | 61in |
| Ripper Type | Parallelogram |
| Number Of Shanks | 3 |
| Maximum Digging Depth | 13.3in |
| Maximum Reach - Ground Line | 23.5in |
| Height | 6.5in |
| Engine Make | Caterpillar |
| Gross Power | 92hp |
| Net Power | 92hp |
| Power Measured @ | 2200rpm |
| Displacement | 269cu in |
| Bore | 4.2in |
| Stroke | 5in |
| Engine Model | Cat C4.4 Acert |
| Eec 80/1269 | 92hp |
| Sae J1349 | 92hp |
| Iso 9249 | 92hp |
| Power - Net | 92hp |
| Drive Pumps | 2 |
| Track Motors | 2 |
| Relief Valve Settings | 6918 psi |
| Maximum Travel Speed - Forward | 5.6mph |
| Maximum Travel Speed - Reverse | 6.2mph |
| Operating Weight - Lgp | 18761lb |
| Operating Weight - Xl | 18080lb |
| Blade Width - Xl | 109.5in |
| Blade Width - Intermediate | 115in |
| Blade Width - Lgp | 124in |
| Blade Height - Xl | 39.8in |
| Blade Height - Intermediate | 33.9in |
| Blade Height - Lgp | 35.8in |
| Blade Capacity - Xl | 2.6yd3 |
| Blade Capacity - Intermediate | 2yd3 |
| Blade Capacity - Lgp | 2.5yd3 |
| Digging Depth - Xl | 22.5in |
| Digging Depth - Intermediate | 23.2in |
| Digging Depth - Lgp | 23.2in |
| Cooling System | 6gal |
| Fuel Tank | 51.5gal |
| Final Drive - Each - Lgp | 2.6gal |
| Final Drive - Each - Xl | 2.6gal |
| Crankcase - With Filter | 3gal |
| Transmission - Hydraulic Tank | 15.7gal |
| Rops | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| Fops | SAE J231-JAN81, ISO 3449-92 |
| Pump Output | 19.4 gal/min |
| Relief Valve Setting | 2988 psi |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Overall Width | 29.2in |
| Drum Diameter | 10in |
| Drum Width | 10.8in |
| Rope Diameter - Recommended | 0.7in |
| Weight | 1345lb |
| Rope Diameter - Optional | 0.8in |
| Speed | Variable |
| Winch Length | 27.8in |
| Throat Clearance | 6.8in |
| Drum Capacity - Optional Cable | 256ft in |
| Maximum Line Pull - Bare Drum | 40000lb |
| Maximum Line Pull - Full Drum | 25000lb |
| Maximum Line Speed - Bare Drum | 131 ft/min |
| Maximum Line Speed - Full Drum | 207 ft/min |
