| Blade Type | VPAT, VPAT Foldable* |
|---|---|
| Lgp Vpat - Blade Capacity | 4.38yd3 |
| Xl Vpat - Blade Capacity | 4.01yd3 |
| Grouser Height | 1.9in |
| Width - Shoe - Lgp | 30in |
| Width - Shoe - Xl | 22in |
| Shoes/Side - Lgp | 40 |
| Shoes/Side - Xl | 40 |
| Track Gauge - Lgp | 79in |
| Track Gauge - Xl | 70in |
| Track On Ground - Lgp | 104in |
| Track On Ground - Xl | 104in |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 8 |
| Ground Contact Area - Lgp | 6200in2 |
| Ground Contact Area - Xl | 4650in2 |
| Ground Pressure - Lgp (Iso 16754) | 4.45 psi |
| Ground Pressure - Xl (Iso 16754) | 5.77 psi |
| Beam Cross Section | 165 211 mm (6.5 8.3 in) |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3ft in |
| Shank Gauge | 5.9ft in |
| Shank Section | 58.5 138 mm (2.3 5.4 in) |
| Maximum Penetration Force - Xl | 9480lb ft |
| Maximum Pry-Out Force - Xl | 37480lb ft |
| Maximum Penetration Force - Lgp | 10138lb ft |
| Maximum Pry-Out Force - Lgp | 37480lb ft |
| Each Additional Shank | 75lb |
| Overall Beam Width | 76.8in |
| Weight - With One Shank | 1863lb |
| Displacement | 402.8cu in |
| Bore | 4.2in |
| Stroke | 5in |
| Emissions | U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 |
| Net Power - Iso 9249 | 130hp |
| Net Power - Sae J1349 | 128hp |
| Gross Power - Sae J1995 | 158hp |
| Engine Model | Cat C6.6 ACERT |
| Flywheel Power | 130hp |
| Engine Power - Iso 14396 | 155hp |
| Net Power - Iso 9249 (Din) | 132hp |
| Engine Power - Iso 14396 (Din) | 157hp |
| Net Power - Eu 80/1269 Eec | 130hp |
| Operating Weight | 29346lb |
| Operating Weight - Lgp | 30750lb |
| Shipping Weight - Lgp | 30353lb |
| Shipping Weight - Xl | 28949lb |
| Operating Weight - Xl | 29346lb |
| Weight - Xl | 28740lb |
| Weight - Lgp | 30144lb |
| Cooling System | 8.6gal |
| Fuel Tank | 77.9gal |
| Hydraulic Tank | 15.3gal |
| Engine Crankcase | 4.4gal |
| Final Drive - Each - Lgp | 6gal |
| Final Drive - Each - Xl | 4gal |
| Brakes | Standards |
| Rops/Fops | Standards |
| Cab | Standards |
| Flange Diameter | 18in |
| Winch Model | PA50 |
| Winch And Bracket Length | 33.2in |
| Winch Drive | Hydrostatic |
| Drum Diameter | 8in |
| Drum Width | 11in |
| Rope Diameter - Recommended | 0.8in |
| Maximum Bare Drum - Line Speed | 124 ft/min |
| Maximum Full Drum - Line Speed | 230 ft/min |
| Winch Case - Width | 35.6in |
| Weight | 2000lb |
| Maximum Bare Drum - Line Pull | 50000lb |
| Maximum Full Drum - Line Pull | 26000lb |
| Optional Cable Size | 0.9in |
| Drum Capacity - Optional Rope | 220in |
| Cable Ferrule Size - Length | 2.7in |
| Engine Emissions | Fully complies with U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 emission standards |
| Transmission Type | Hydrostatic |
| Forward | 0-10 km/h (0-6.2 mph) |
| Reverse | 0-10 km/h (0-6.2 mph) |
