| Blade Type | VPAT, SU |
|---|---|
| Lgp Vpat - Blade Capacity | 5.06yd3 |
| Lgp Vpat - Blade Width | 13.39ft in |
| Xl Su - Blade Capacity | 5.6yd3 |
| Xl Su - Blade Width | 10.35ft in |
| Xl Su - Narrow* Blade Width | 9.84ft in |
| Xl Vpat - Blade Capacity | 4.33yd3 |
| Xl Vpat - Blade Width | 10.73ft in |
| Track Gauge - Xl | 74.41in |
| Track On Ground - Lgp | 122.56in |
| Track On Ground - Xl | 102.8in |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 7 |
| Width - Shoe - Lgp | 33.07in |
| Width - Shoe - Xl | 24.01in |
| Shoes/Side - Xl | 40 |
| Ground Contact Area - Lgp | 8107in2 |
| Ground Contact Area - Xl | 4929in2 |
| Ground Pressure - Lgp | 4.41 psi |
| Ground Pressure - Xl | 6.55 psi |
| Grouser Height - Lgp | 2.21in |
| Grouser Height - Xl | 2.6in |
| Shoes/Side - Lgp | 46 |
| Track Gauge - Lgp | 85.03in |
| Beam Cross Section | 216 mm 254 mm (8.5 in 10.0 in) |
| Number Of Pockets | 3 |
| Maximum Penetration - Xl | 20.2in |
| Maximum Penetration - Lgp | 15.6in |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3.3ft in |
| Shank Gauge | 6.6ft in |
| Shank Section | 73 mm 176 mm (2.9 in 6.9 in) |
| Maximum Penetration Force - Xl | 11600lb ft |
| Maximum Pry-Out Force - Xl | 47480lb ft |
| Maximum Penetration Force - Lgp | 9667lb ft |
| Maximum Pry-Out Force - Lgp | 38217lb ft |
| Each Additional Shank | 172lb |
| Weight - With Three Shanks | 3444lb |
| Overall Beam Width | 86.7in |
| Displacement | 402.8cu in |
| Bore | 4.2in |
| Stroke | 5in |
| Emissions | U.S. Tier 4 Interim, EU Stage IIIB, Japan 2011 (Tier 4 Interim) |
| Net Power - Iso 9249 | 150hp |
| Net Power - Sae J1349 | 148hp |
| Gross Power - Sae J1995 | 177hp |
| Engine Model | Cat C6.6 ACERT |
| Flywheel Power | 150hp |
| Engine Power - Iso 14396 | 173hp |
| Net Power - Iso 9249 (Din) | 152hp |
| Engine Power - Iso 14396 (Din) | 175.3hp |
| Net Power - Eu 80/1269 Eec | 150hp |
| Operating Weight | 36392lb |
| 2.0 Forward | 2.9mph |
| 3.0 Forward | 4.7mph |
| 2.0 Reverse | 3.2mph |
| 1.5 Forward | 2mph |
| 2.5 Forward | 3.6mph |
| 1.5 Reverse | 2mph |
| 3.5 Forward | 6.3mph |
| 3.0 Reverse | 5.3mph |
| 3.5 Reverse | 7.3mph |
| 1.5 Forward - Drawbar Pull | 71939lb |
| 2.5 Forward* - Drawbar Pull | 39341.6lb |
| 3.5 Forward* - Drawbar Pull | 21806.5lb |
| 2.5 Reverse | 4mph |
| Operating Weight - Lgp | 39895lb |
| Shipping Weight - Lgp | 38788lb |
| Shipping Weight - Xl | 35602lb |
| Operating Weight - Xl | 36392lb |
| Xl Vpat Blade | 2341lb |
| Lgp Vpat - Blade | 2720lb |
| Xl Vpat Foldable | 2762lb |
| Lgp Vpat - Foldable | 3287lb |
| Xl Su - Blade | 5732lb |
| Xl Vpat Landfill | 2912lb |
| Lgp Vpat - Landfill | 3166lb |
| Winch Pa55 | See value and note, next page |
| Cooling System | 10.6gal |
| Fuel Tank | 79gal |
| Final Drive - Each | 2.3gal |
| Hydraulic Tank | 7.8gal |
| Brakes | Brakes meet the standard ISO 10265:2008. |
| Rops | Meets ROPS criteria SAE J1040-1994, ISO 3471:2008 and DLV criteria SAE J397B-2009, ISO 3164:1995. |
| Fops | Meets ISO 3449-2005 Level II and DLV criteria SAE J397B-2009, ISO 3164:1995. |
| Flange Diameter | 19.8in |
| Oil Capacity | 19.6gal |
| Winch Model | PA55 |
| Winch And Bracket Length | 45.1in |
| Drum Capacity - 22 Mm (0.88 In) | 288.8ft in |
| Winch Drive | Mechanical |
| Control | Electric |
| Overall Width | 38.4in |
| Drum Diameter | 10in |
| Drum Width | 12.4in |
| Rope Diameter - Recommended | 0.8in |
| Cable Ferrule Size - O.D. Length | 54 mm 67 mm (2.13 in 2.63 in) |
| Maximum Bare Drum - Line Speed | 147 ft/min |
| Maximum Full Drum - Line Speed | 257 ft/min |
| Winch Case - Width | 38.4in |
| Weight | 2814lb |
| Maximum Bare Drum - Line Pull | 69200lb |
| Maximum Full Drum - Line Pull | 54100lb |
| Note | * Weight: Includes pump, operator controls, oil, mounting brackets and spacers. |
