| Blade Type | VPAT, SU |
|---|---|
| Xl Su - Blade Capacity | 5.6yd3 |
| Xl Su - Blade Width | 10.46ft in |
| Xl Vpat - Blade Capacity | 4.16yd3 |
| Xl Vpat - Blade Width | 10.73ft in |
| Width Over Tracks | 8.2ft in |
| Height To Top Of Cab | 10.2ft in |
| Length Of Track On Ground | 8.48ft in |
| Ground Clearance | 1.4ft in |
| Length W/O Blade | 12.27ft in |
| Length - Track On Ground | 100.39in |
| Height - Rops/Canopy | 9.91ft in |
| Width - Without Blade | 98.11in |
| Track Gauge | 6.21ft in |
| Standard Shoe Size | 24.01in |
| Ground Pressure | 7.37psi |
| Ground Contact Area - Xl | 4822in2 |
| Ground Pressure - Xl Ds | 7.37 psi |
| Ground Pressure - Xl Ftc | 7.24 psi |
| Grouser Height | 2.25in |
| Number Of Shoes Per Side | 40 |
| Shoes/Side - Lgp | 46 |
| Shoes/Side - Xl | 40 |
| Track Gauge - Xl | 74in |
| Track On Ground - Xl | 100in |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 7 |
| Width - Shoe - Xl | 24in |
| Ground Contact Area | 4882in2 |
| Beam Cross Section | 216×254 mm 8.5×10.0 in |
| Number Of Pockets | 3 |
| Maximum Penetration - Xl | 18.6in |
| Ripper Type | Fixed Parallelogram |
| Overall Beam Width | 86.7in |
| Weight - Each Additional Shank | 172lb |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Net Power | 145hp |
| Power Measured @ | 2200rpm |
| Displacement | 439cu in |
| Bore | 4.4in |
| Stroke | 5in |
| Net Power - Iso 9249 | 145hp |
| Net Power - Sae J1349 | 143hp |
| Engine Model | Cat 3126B DITAAC |
| Flywheel Power | 145hp |
| Net Power - Eu 80/1269 | 145hp |
| Fuel Capacity | 79gal |
| Cooling System Fluid Capacity | 9.3gal |
| Hydraulic Fluid Capacity | 7.8gal |
| Final Drives Fluid Capacity | 1.9gal |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 70amps |
| Transmission Type | powershift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 6.3mph |
| Max Speed - Reverse | 7.5mph |
| 1.0 Forward | 2.1mph |
| 2.0 Forward | 3.6mph |
| 3.0 Forward | 6.3mph |
| 1.0 Reverse | 2.5mph |
| 2.0 Reverse | 4.3mph |
| 3.0 Reverse | 7.4mph |
| Drawbar Pull - 2.0 Forward | 38800lb |
| Drawbar Pull - 3.0 Forward | 21500lb |
| Drawbar Pull - 1.0 Forward | 71000lb |
| Operating Weight | 35020.4lb |
| Operating Weight - Xl-Ds | 35020lb |
| Shipping Weight - Xl Ftc | 33703lb |
| Shipping Weight - Xl Ds | 34362lb |
| Width | 10.8ft in |
| Height | 49in |
| Capacity | 4.2yd3 |
| Cutting Depth | 20.5in |
| Cooling System | 10.8gal |
| Fuel Tank | 79gal |
| Final Drive - Each | 1.8gal |
| Hydraulic Tank | 7.8gal |
| Flange Diameter | 19.8in |
| Oil Capacity | 19.6gal |
| Winch Model | PA55 |
| Winch And Bracket Length | 45.1in |
| Drum Diameter | 10in |
| Drum Width | 12.4in |
| Winch Case - Width | 38.4in |
| Weight | 2814lb |
