| Capacity - Lgp A-Blade | 6.82yd3 |
|---|---|
| Capacity - Lgp S-Blade | 4.83yd3 |
| Capacity - Lgp Vpat-Blade | 6.65yd3 |
| Capacity - Xl A-Blade | 5.14yd3 |
| Capacity - Xl Su-Blade | 6.94yd3 |
| Capacity - Xl Vpat-Blade | 6.19yd3 |
| Capacity - Xw A-Blade | 5.63yd3 |
| Capacity - Xw Su-Blade | 6.6yd3 |
| Capacity - Xw Vpat-Blade | 6.65yd3 |
| Width - Lgp A-Blade | 16.7ft in |
| Width - Lgp S-Blade | 13.3ft in |
| Width - Lgp Vpat-Blade | 13.7ft in |
| Width - Xl A-Blade | 13.7ft in |
| Width - Xl Su-Blade | 10.7ft in |
| Width - Xl Vpat-Blade | 12.8ft in |
| Width - Xw A-Blade | 14.8ft in |
| Width - Xw Su-Blade | 11.7ft in |
| Width - Xw Vpat-Blade | 13.7ft in |
| Ground Clearance | 1.25ft in |
| Grouser Height | 2.6in |
| Oscillation At Front Idler - Xw | 5.4in |
| Pitch | 8in |
| Shoe Type | Moderate Service |
| Shoes/Side - Xl/Xl Vpat/Xw | 41 |
| Track Gauge - Xl | 74in |
| Track Gauge - Xl Vpat | 84in |
| Track Gauge - Xw | 80in |
| Width - Shoe - Xl/Xl Vpat | 22in |
| Width - Shoe - Xw | 30in |
| Width - Shoe - Xw Vpat | 28in |
| Width - Shoe - Lgp | 36in |
| Width - Shoe - Lgp Vpat | 31in |
| Carrier Rollers/Side | 1 |
| Beam Cross Section | 219 mm 254 mm (8.8 in 10 in) |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3.3ft in |
| Shank Gauge | 6.6ft in |
| Shank Section | 74 mm 175 mm (2.9 in 6.9 in) |
| Overall Beam Width | 87in |
| Weight - Each Additional Shank | 163lb |
| Maximum Penetration | 19.7in |
| Pry-Out Force | 19600lb |
| Weight - With One Shank | 3606lb |
| Maximum Penetration Force | 14557lb |
| Ramp Angle | 26 degrees |
| Displacement | 567cu in |
| Bore | 4.5in |
| Stroke | 5.9in |
| Engine Model | Cat C9.3 ACERT |
| Flywheel Power | 205hp |
| Global Emissions | U.S. Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4 |
| Operating Weight | 46158lb |
| 2.0 Forward | 3.2mph |
| 3.0 Forward | 5.3mph |
| 2.0 Reverse | 4.1mph |
| 3.0 Reverse | 5.3mph |
| 1.5 Forward | 2.3mph |
| 2.5 Forward | 4.1mph |
| 1.5 Reverse | 3mph |
| 2.5 Reverse | 5.2mph |
| Drawbar Pull - 2.0 Forward | 49260lb |
| Drawbar Pull - 3.0 Forward | 26730lb |
| 3.5 Forward | 7.1mph |
| 3.5 Reverse | 9mph |
| Drawbar Pull - 1.5 Forward | 81430lb |
| Drawbar Pull - 2.5 Forward | 49260lb |
| Drawbar Pull - 3.5 Forward | 26730lb |
| Operating Weight - Xl A | 46791lb |
| Shipping Weight - Xl A | 39138lb |
| Operating Weight - Xl Su | 46263lb |
| Shipping Weight - Xl Su | 39138lb |
| Operating Weight - Xw A | 48922lb |
| Shipping Weight - Xw A | 40596lb |
| Operating Weight - Xw Su | 48034lb |
| Shipping Weight - Xw Su | 40596lb |
| Operating Weight - Xw Vpat | 53170lb |
| Shipping Weight - Xw Vpat | 45840lb |
| Operating Weight - Lgp S | 50490lb |
| Shipping Weight - Lgp S | 43664lb |
| Operating Weight - Lgp Vpat | 53651lb |
| Shipping Weight - Lgp Vpat | 48521lb |
| Shipping Weight - Lgp A | 43664lb |
| Operating Weight - Lgp A | 52954lb |
| Operating Weight - Xl Vpat | 52167lb |
| Shipping Weight - Xl Vpat | 47165lb |
| Cooling System | 17gal |
| Fuel Tank | 112gal |
| Final Drive - Each | 3.6gal |
| Hydraulic Tank | 17.3gal |
| Engine Crankcase | 6.5gal |
| Power Train | 39.1gal |
| Pivot Shaft Compartment | 1.3gal |
| Roller Frames - Each | 6.6gal |
| Brakes | Brakes meet the International Standard ISO 10265:2008. |
| Rops/Fops | ROPS meets criteria ISO 3471:1994, 2008 FOPS meets ISO 3449:1992, 2005 Level II |
| Cab | Meets appropriate standards as listed below. |
| Steering | 5800 psi |
| Bulldozer - Lift - Non-Vpat | 2800 psi |
| Bulldozer - Lift - Vpat | 3125 psi |
| Bulldozer - Tilt - Non-Vpat | 2800 psi |
| Bulldozer - Tilt - Vpat | 3125 psi |
| Bulldozer - Angle - Vpat | 3125 psi |
| Ripper - Lift - Non-Vpat | 2800 psi |
| Ripper - Lift - Vpat | 3125 psi |
| Lift Cylinder Flow | 50 gal/min |
| Ripper Cylinder Flow | 50 gal/min |
| Pump Output - Steering | 52 gal/min |
| Pump Output - Implement | 54 gal/min |
| Tilt Cylinder Flow | 29 gal/min |
| Rpm At Rated Engine Speed - Fan | 2135rpm |
| Angle Cylinder Flow - Vpat | 45 gal/min |
| Pump Output - Fan | 25 gal/min |
| Flange Diameter | 19.9in |
| Oil Capacity | 17.8gal |
| Winch Model | PA56 |
| Winch And Bracket Length | 47.8in |
| Drum Capacity - 22 Mm (0.88 In) | 281ft in |
| Winch Drive | Mechanical |
| Control | Electric |
| Overall Width | 38.4in |
| Drum Diameter | 10in |
| Drum Width | 12.4in |
| Rope Diameter - Recommended | 0.9in |
| Cable Ferrule Size - O.D. Length | 54 mm 67 mm (2.1 in 2.6 in) |
| Maximum Bare Drum - Line Speed | 130 ft/min |
| Maximum Full Drum - Line Speed | 224 ft/min |
| Winch Case - Width | 34.3in |
| Maximum Bare Drum - Line Pull | 89800lb |
| Maximum Full Drum - Line Pull | 76300lb |
| Increased Tractor Length - Lgp | 14.4in |
| Drum Capacity - 25 Mm (1.0 In) | 218ft in |
| Weight | 2652lb |
| Winch Case - Length | 35.5in |
