| Width - Xw Vpat-Blade | 13.7ft in |
|---|---|
| Width - Lgp S-Blade | 13.3ft in |
| Width - Lgp Vpat-Blade | 13.7ft in |
| Capacity - Xl Su-Blade | 14.3yd3 |
| Capacity - Xw Su-Blade | 14.3yd3 |
| Capacity - Lgp S-Blade | 12.3yd3 |
| Capacity - Xw Vpat-Blade | 6.7yd3 |
| Capacity - Lgp Vpat-Blade | 5.5yd3 |
| Width - Xl Su-Blade | 10.7ft in |
| Width - Xw Su-Blade | 11.7ft in |
| Ground Clearance | 1.25ft in |
| Ground Pressure - Xw Vpat | 7.5 psi |
| Grouser Height | 2.6in |
| Pitch | 8in |
| Shoe Type | Moderate Service |
| Shoes/Side - Lgp | 45 |
| Shoes/Side - Xl/Xw | 41 |
| Track Gauge - Xl | 74in |
| Track Gauge - Xw | 80in |
| Track On Ground - Lgp | 128in |
| Track On Ground - Xl/Xw | 112in |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl/Xw | 7 |
| Width - Shoe - Lgp | 36in |
| Width - Shoe - Lgp Vpat | 31in |
| Width - Shoe - Xw | 30in |
| Width - Shoe - Xw Vpat | 28in |
| Width - Shoe - Xl | 22in |
| Carrier Rollers/Side | 1 |
| Ground Contact Area - Lgp | 9223in2 |
| Ground Contact Area - Xl | 4929in2 |
| Ground Contact Area - Xw | 6680in2 |
| Ground Contact Area - Xw Vpat | 6246in2 |
| Ground Pressure - Lgp | 4.86 psi |
| Ground Pressure - Lgp Vpat | 6.2 psi |
| Ground Pressure - Xl | 8.3 psi |
| Ground Pressure - Xw | 6.4 psi |
| Displacement | 567cu in |
| Bore | 4.5in |
| Stroke | 5.9in |
| Emissions | U.S. Tier 4 Interim/EU Stage IIIB |
| Net Power - Iso 9249 | 205hp |
| Net Power - Sae J1349 | 205hp |
| Net Power - 80/1269/Eec | 205hp |
| Gross Power - Sae J1995 | 229hp |
| Engine Model | Cat C9.3 ACERT |
| Flywheel Power | 205hp |
| Engine Power - Iso 14396 | 227hp |
| Net Power - Iso 9249 (Din) | 208hp |
| Engine Power - Iso 14396 (Din) | 230hp |
| Drive Train Type | Mechanical |
| Operating Weight | 54791lb |
| 2.0 Forward | 3.2mph |
| 3.0 Forward | 5.3mph |
| 2.0 Reverse | 4.1mph |
| 3.0 Reverse | 5.3mph |
| 1.5 Forward | 2.3mph |
| 2.5 Forward | 4.1mph |
| 1.5 Reverse | 3mph |
| 2.5 Reverse | 5.2mph |
| Drawbar Pull - 2.0 Forward | 46410lb |
| Drawbar Pull - 3.0 Forward | 25360lb |
| 3.5 Forward | 7.1mph |
| 3.5 Reverse | 9mph |
| Drawbar Pull - 1.5 Forward | 79910lb |
| Drawbar Pull - 2.5 Forward | 46410lb |
| Drawbar Pull - 3.5 Forward | 25360lb |
| Operating Weight - Xl A | 51586lb |
| Shipping Weight - Xl A | 44084lb |
| Operating Weight - Xl Su | 51121lb |
| Shipping Weight - Xl Su | 44084lb |
| Operating Weight - Xw A | 53900lb |
| Shipping Weight - Xw A | 46191lb |
| Operating Weight - Xw Su | 53286lb |
| Shipping Weight - Xw Su | 46191lb |
| Operating Weight - Xw Vpat | 58397lb |
| Shipping Weight - Xw Vpat | 51095lb |
| Operating Weight - Lgp S | 54791lb |
| Shipping Weight - Lgp S | 48365lb |
| Operating Weight - Lgp Vpat | 59457lb |
| Shipping Weight - Lgp Vpat | 52147lb |
| Shipping Weight - Lgp A | 48365lb |
| Operating Weight - Lgp A | 57066lb |
| Cooling System | 17gal |
| Fuel Tank | 112gal |
| Final Drive - Each | 3.6gal |
| Hydraulic Tank | 17.3gal |
| Engine Crankcase | 6.5gal |
| Power Train | 39.1gal |
| Pivot Shaft Compartment | 1.3gal |
| Roller Frames - Each | 6.6gal |
| Brakes | Brakes meet the International Standard ISO 10265:2008. |
| Rops/Fops | ROPS meets criteria ISO 3471:1994, 2008 FOPS meets ISO 3449:1992, 2005 Level II |
| Cab | Meets appropriate standards as listed below. |
| Steering | 5800 psi |
| Bulldozer - Lift - Non-Vpat | 2800 psi |
| Bulldozer - Lift - Vpat | 3125 psi |
| Bulldozer - Tilt - Non-Vpat | 2800 psi |
| Bulldozer - Tilt - Vpat | 3125 psi |
| Bulldozer - Angle - Vpat | 3125 psi |
| Ripper - Lift - Non-Vpat | 2800 psi |
| Ripper - Lift - Vpat | 3125 psi |
| Lift Cylinder Flow | 50 gal/min |
| Ripper Cylinder Flow | 50 gal/min |
| Pump Output - Steering | 52 gal/min |
| Pump Output - Implement | 54 gal/min |
| Tilt Cylinder Flow | 29 gal/min |
| Angle Cylinder Flow - Vpat | 45 gal/min |
| Pump Output - Fan | 25 gal/min |
| Maximum Penetration Force | 14557lb |
| Pry-Out Force | 20137lb |
| Overall Beam Width | 87in |
| Weight - With One Shank | 3606lb |
| Weight - Each Additional Shank | 163lb |
| Ramp Angle | 26degrees |
| Pocket Spacing | 39.4in |
| Shank Gauge | 78.8in |
| Shank Section | 74 mm 175 mm (2.9 in 6.9 in) |
| Rippers Type | Fixed Parallelogram |
| Number Of Pockets | 3 |
| Maximum Penetration | 18in |
| Oil Capacity | 17.8gal |
| Winch Model | PA56 |
| Increased Tractor Length - Lgp | 14.4in |
| Drum Diameter | 10in |
| Winch Drive | Mechanical |
| Maximum Bare Drum - Line Pull | 89800lb |
| Maximum Full Drum - Line Pull | 76300lb |
| Winch Case - Width | 34.3in |
| Flange Diameter | 19.9in |
| Drum Width | 12.4in |
| Weight | 2652lb |
| Winch And Bracket Length | 47.8in |
| Winch Case - Length | 35.5in |
| Control | Electric |
| Rope Diameter - Recommended | 0.9in |
| Overall Width | 38.4in |
| Drum Capacity - 22 Mm (0.88 In) | 281ft in |
| Drum Capacity - 25 Mm (1.0 In) | 218ft in |
