| Height To Top Of Cab | 13.1ft in |
|---|---|
| Length Of Track On Ground | 11.42ft in |
| Ground Clearance | 1.67ft in |
| Track Gauge | 7.42ft in |
| Length | 357.09in |
| Number Of Shoes (Each Side) | 30 |
| Number Of Shoes Per Side | 39 |
| Shoe Size | 24.02in |
| Shoe Type | Komatsu K-Bogie |
| Suspension | Oscillating equaliser bar and pivot shaft |
| Track Rollerframe | Cylinder, high-tensile-strength steel construction |
| Ground Contact Area | 6580in2 |
| Ground Pressure | 12.7psi |
| Grouser Height | 3.15in |
| Minimum Turning Radius | 12.8ft in |
| Horsepower, Gross-Sae J1995 | 452hp |
| Horsepower, Net-Iso 9249 | 449.3hp |
| Horsepower, Net-Sae J1349 | 449.3hp |
| Fan Drive Method | Hydraulic |
| Lubrication Method | Gear pump ,Force Lubrication |
| Filter | Full Flow |
| Number Of Cylinders | 6 |
| Engine Make | 2238 |
| Engine Model | SAA6D140E-5 |
| Engine Type | 4-cycle, water-ooled, direct injection |
| Governor | All speed, electronic |
| Power Measured @ | 2000rpm |
| Displacement | 930.1cu in |
| Aspiration | Turbochanged |
| Bore | 5.6in |
| Stroke | 6.5in |
| Maximum Speeds Fwd | 7mph |
| Maximum Speeds Rev | 9.3mph |
| Transmission | Torqflow |
| Number Of Speeds - Forward | 3 |
| Number Of Speeds - Reverse | 3 |
| Steering | Hydrostatic Steering System |
| Fuel Tank | 222gal |
| Final Drive | 10.6gal |
| Engine Oil | 13.8gal |
| Coolant | 26.5gal |
| Blade Capacity | 18yd3 |
| Blade Type | Semi-U (dual tilt) |
| Blade Length | 169.3in |
| Blade Height | 77.2in |
| Blade Cut Depth | 25.2in |
| Ripper Type | Adjust |
| Ripper Depth | 35.5in |
| Transmission Type | TORQFLOW |
| Operating Weight | 114688.9lb |
| Ripper Weight | 9837.1lb |
| Blade Weight | 16667lb |
| Hydraulic System Type | Closed-center Load Sensing System (CLSS) |
