| Length W/ Blade | 13.7ft in |
|---|---|
| Width Over Tracks | 6.27ft in |
| Height To Top Of Cab | 9.06ft in |
| Length Of Track On Ground | 7.17ft in |
| Ground Clearance | 1.04ft in |
| Track Gauge | 4.96ft in |
| Standard Shoe Size | 15.75in |
| Ground Contact Area | 2713in2 |
| Shoe Width (Standard) | 15.75in |
| Suspension | Rigid type |
| Track Rollerframe | Monochoque,large Section |
| Type Of Shoes(Standard) | Single grouser |
| Rollers And Idlers | Lubricated track rollers |
| Ground Pressure | 6.68psi |
| Grouser Height | 1.86in |
| Length Of Track Ground | 86.03in |
| Number Of Shoes (Each Side) | 40 |
| Minimum Turning Radius | 7.3ft in |
| Lubrication Method | Gear pump ,Force Lubrication |
| Filter | Full Flow |
| Epa | Tier -3 Emission certified |
| Number Of Cylinders | 4 |
| Piston Displacement | 199cu in |
| Engine Make | 2238 |
| Engine Model | SAA4D95LE-5 |
| Engine Type | 4-Cycle,water-Cooled,Direct injection |
| Gross Power | 80hp |
| Governor | All speed, electronic |
| Net Power | 78hp |
| Power Measured @ | 2200rpm |
| Displacement | 199cu in |
| Aspiration | Turbocharged/Air-to-Air Aftercooled |
| Bore | 3.8in |
| Stroke | 4.6in |
| Horse Power: Sae J1995 | 80.5hp |
| Fan Drive Type | Hydraulic (Reversible for cleaning) |
| Fuel Tank - Diesel | 51.6gal |
| Hydraulic Tank | 15.9gal |
| Final Drive | 1gal |
| Engine Oil | 3gal |
| Coolant | 4.8gal |
| Operating Weight | 18055.9lb |
| Fuel Capacity | 51.6gal |
| Cooling System Fluid Capacity | 4.8gal |
| Engine Oil Capacity | 3gal |
| Hydraulic Fluid Capacity | 15.9gal |
| Final Drives Fluid Capacity | 1gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 35amps |
| Transmission Type | dual path hydrostatic |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 5.3mph |
| Max Speed - Reverse | 5.3mph |
| Tractor Weight - Rops Canopy | 15234lb |
| Tractor Weight - Rops Cab | 16137.9lb |
| Operating Weight - Rops Canopy | 17923.6lb |
| Operating Weight - Rops Cab | 18827.5lb |
| Blade Lift(No.Of.Cylinders) | 2 |
| Blade-Tilit(No.Of.Cylinders) | 1 |
| Blade Angle(No.Of.Cylinders) | 2 |
| Blade Lift(Bore) | 0.3ft in |
| Blade-Tilit(Bore) | 0.3ft in |
| Blade Angle(Bore) | 0.3ft in |
| Pump Type | Piston-type |
| Relief Valve Pressure | 3983psi |
| Pump Flow Capacity | 26.2gal/min |
| Width | 8.4ft in |
| Height | 33.1in |
| Capacity | 2.2yd3 |
| Blade Angle (Both Directions) | 25degrees |
| Cutting Depth | 15.4in |
