| Height To Top Of Cab | 14.06ft in |
|---|---|
| Length Of Track On Ground | 13.06ft in |
| Ground Clearance | 2.01ft in |
| Track Gauge | 8.21ft in |
| Length | 412.8in |
| Number Of Shoes (Each Side) | 41 |
| Number Of Shoes Per Side | 41 |
| Shoe Size | 24.02in |
| Suspension | Oscillating equaliser bar and pivot shaft |
| Track Rollerframe | Cylinder, high-tensile-strength steel construction |
| Ground Contact Area | 7527in2 |
| Ground Pressure | 15.6psi |
| Grouser Height | 3.55in |
| Minimum Turning Radius | 13.8ft in |
| Horsepower, Gross-Sae J1995 | 635.7hp |
| Horsepower, Net-Iso 9249 | 610.2hp |
| Horsepower, Net-Sae J1349 | 610.2hp |
| Fan Drive Method | Hydraulic |
| Lubrication Method | Gear pump ,Force Lubrication |
| Filter | Full Flow |
| Number Of Cylinders | 6 |
| Engine Make | 2238 |
| Engine Model | SAA6D170E-5 |
| Governor | All-speed and mid-range, electronic |
| Power Measured @ | 1800rpm |
| Displacement | 1412.7cu in |
| Aspiration | Turbochanged |
| Bore | 6.7in |
| Stroke | 6.7in |
| Maximum Speeds Fwd | 7.4mph |
| Maximum Speeds Rev | 9.9mph |
| Transmission | Torqflow |
| Number Of Speeds - Forward | 3 |
| Number Of Speeds - Reverse | 3 |
| Fuel Tank | 317.1gal |
| Final Drive | 17.2gal |
| Engine Oil | 22.8gal |
| Coolant | 31.8gal |
| Blade Capacity | 24.2yd3 |
| Blade Type | Semi-U |
| Blade Length | 184.9in |
| Blade Height | 89.2in |
| Blade Cut Depth | 29in |
| Ripper Type | Adjust |
| Ripper Depth | 44.9in |
| Transmission Type | TORQFLOW |
| Operating Weight | 157939.2lb |
| Ripper Weight | 14991.5lb |
| Blade Weight | 24074.5lb |
| Hydraulic System Type | Closed-center Load Sensing System (CLSS) |
