| Height To Top Of Cab | 9.31ft in |
|---|---|
| Ground Clearance | 1.27ft in |
| Track Length On Ground | 7.75ft in |
| Track Gauge | 5.42ft in |
| Number Of Shoes (Each Side) | 39 |
| Rollers And Idlers | Lubricated track rollers |
| Shoe Width (Standard) | 18.12in |
| Suspension | Rigid type |
| Track Rollerframe | Monochoque,large Section |
| Type Of Shoes(Standard) | Single grouser |
| Ground Contact Area | 33650567.31in2 |
| Ground Pressure | 5.92psi |
| Grouser Height | 2.09in |
| Length Of Track Ground | 92.92in |
| Minimum Turning Radius | 7.3ft in |
| Horsepower, Net-Sae J1349 | 106hp |
| Lubrication Method | Gear pump ,Force Lubrication |
| Filter | Full Flow |
| Epa | Tier 3 and EU Stage 3A emissions certified |
| Number Of Cylinders | 4 |
| Piston Displacement | 272.2cu in |
| Engine Make | 2238 |
| Engine Model | Komatsu SAA4D107E-1* |
| Rated Engine Speed | 2200 RPM |
| Engine Type | 4-Cycle,water-Cooled,Direct injection |
| Gross Power | 80hp |
| Governor | All speed, electronic |
| Net Power | 78hp |
| Power Measured @ | 2200rpm |
| Displacement | 199cu in |
| Aspiration | Turbocharged/Air-to-Air Aftercooled |
| Bore | 4.3in |
| Stroke | 4.9in |
| Horse Power: Sae J1995 | 107.2hp |
| Fan Drive Type | Hydraulic |
| Fuel Tank - Diesel | 51.6gal |
| Hydraulic Tank | 15.9gal |
| Final Drive | 1gal |
| Engine Oil | 4gal |
| Coolant | 6.1gal |
| Operating Weight | 18055.9lb |
| Fuel Capacity | 51.6gal |
| Cooling System Fluid Capacity | 4.8gal |
| Engine Oil Capacity | 3gal |
| Hydraulic Fluid Capacity | 15.9gal |
| Final Drives Fluid Capacity | 1gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 35amps |
| Transmission Type | dual path hydrostatic |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 5.3mph |
| Max Speed - Reverse | 5.3mph |
| Tractor Weight - Rops Canopy | 17196.1lb |
| Operating Weight - Rops Canopy | 19929.8lb |
| Hydraulic System Type | Closed-centre Load Sensing System (CLSS) |
| Blade Lift(No.Of.Cylinders) | 2 |
| Blade-Tilit(No.Of.Cylinders) | 1 |
| Blade Angle(No.Of.Cylinders) | 2 |
| Blade Lift(Bore) | 0.3ft in |
| Blade-Tilit(Bore) | 0.3ft in |
| Blade Angle(Bore) | 0.3ft in |
| Relief Valve Pressure | 3983psi |
| Pump Flow Capacity | 26.2gal/min |
| Width | 8.4ft in |
| Height | 33.1in |
| Capacity | 2.2yd3 |
| Blade Angle (Both Directions) | 25degrees |
| Cutting Depth | 15.4in |
