| Overall Length | 36.14ft in |
|---|---|
| Overall Height | 16.57ft in |
| Wheelbase | 16.25ft in |
| Turning Radius | 33.14ft in |
| Width Over Tires | 17.07ft in |
| Capacity - Struck | 40yd3 |
| Heaped (2:1, Sae) | 60yd3 |
| Payload | 91.7 metric tons |
| Material | 400 Brinell hardness high tensile strength steel |
| Material Thickness-Bottom | 0.8in |
| Material Thickness-Front | 0.5in |
| Material Thickness-Sides | 0.4in |
| Target Area | 7070 mm x 5150 mm |
| Heating | Heating by exhaust gas |
| Structure | V-shape body with V-bottom |
| Dumping Angle | 48degrees |
| Height At Full Dump | 33.1ft in |
| Lubrication System | Method- Gear pump, force-lubrication Filter-Full-flow type |
| Number Of Cylinders | 12 |
| Engine Make | 2238 |
| Engine Model | SAA12V140E-3 |
| Engine Type | Water-cooled, 4-cycle |
| Air Cleaner | Dry type with double elements and precleaners, with dust indicator |
| Governor | Electronic control |
| Power Measured @ | 1900rpm |
| Max Torque | 5080N. m 518 kg. m |
| Aspiration | turbo-charged after-cooled |
| Displacement | 1860.1cu in |
| Bore And Stroke | 140 mm x 165 mm |
| Horse Power: Sae J1995 | 1200hp |
| Fan Drive Type | Mechanical |
| Fuel System | Direct injection |
| Fuel Tank | 1308gal |
| Hydraulic System | 175gal |
| Engine Oil | 129gal |
| Differentials | 137gal |
| Suspension | 93gal |
| Break Control | 36gal |
| Max Speed | 40.4mph |
| Torque Converter | 3-elements, 1-Stage, 2-phase |
| Transmission | Full-automatic, planetary type |
| Speed Range | 7 speeds forward and 2 reverse |
| Lockup Clutch | Wet, multiple-disc clutch |
| Forward | Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears |
| Reverse | Torque converter drivee, direct drive (lockup) |
| Shift Control | Electronic shift control with automatic clutch modulation in all gears |
| Gross Weight | 361073.1lb |
| Empty Weight | 158732.9lb |
| Standard Tire | 27.00 R49 |
| Final Drive | Planetary gear |
| Differential | 3.357 |
| Planetary | 6.333 |
| Rear | Full-floating |
| Hoist Cylinder | Twin, 2-stage telescopic type |
| Relief Pressure | 20.6 MPa 210 kg/cm2 |
| Hoist Time | Raise-13 s, Lower-14 s |
| Parking Brake | Spring applied, multiple-disc type(actuates on all wheels) |
| Service Brake | Front- Fully hydraulic control, oil-cooled multiple-disc type, Rear- Fully hydraulic control, oil-cooled multiple-disc type |
| Retarder | Oil-cooled, multiple-disc front and rear brakes act as retarder. |
| Secondary Brake | Pedal operation When hydraulic pressure drops below the rated level, parking brake is automatically actuated |
| Brake Surface | Front- 37467 cm2 , Rear-37467 cm2 |
