| Track Gauge | 6.53ft in |
|---|---|
| Drawbar Pull | 20720lb |
| Max Travel Speed | 3.42mph |
| Machine Swing Speed | 11rpm |
| Boom Swing Left | 60 degrees |
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Gross Power | 66.6hp |
| Net Power | 65hp |
| Power Measured @ | 2400rpm |
| Displacement | 203.2cu in |
| Aspiration | turbocharged |
| Bore | 3.7in |
| Stroke | 4.7in |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage IIIB emission standards. |
| Net Power - Iso 9249 | 65hp |
| Engine Model | Cat C3.3B |
| Gross Power - Iso 14396 | 66.6hp |
| Fuel Capacity | 33gal |
| Cooling System Fluid Capacity | 3.7gal |
| Engine Oil Capacity | 3gal |
| Swing Speed | 11rpm |
| Operating Weight | 18519lb |
| Operating Weight - With Cab | 18519lb |
| Minimum Bucket Capacity | 0.5yd3 |
| Maximum Bucket Capacity | 1.1yd3 |
| Blade Width | 7.7ft in |
| Blade Height | 17.8in |
| Height | 17.7in |
| Width | 7.7ft in |
| Note | Load sensing hydraulics with variable displacement piston pump. |
| Lift Height | 15in |
| Dig Depth | 14.2in |
| Operating Pressure - Swing | 3481 psi |
| Operating Pressure - Equipment | 4061 psi |
| Operating Pressure - Travel | 4061 psi |
| Digging Force - Stick - Standard | 9015lb |
| Digging Force - Stick - Long | 7891lb |
| Digging Force - Bucket | 13534lb |
| Pump Flow At 2,000 Rpm | 39.6 gal/min |
| Machine Overhang | 11in |
| Stick Length - Standard | 66in |
| Stick Length - Long | 87in |
| Maximum Dig Depth | 163.5in |
| Counterweight | 551lb |
| Cooling System | 3.7gal |
| Fuel Tank | 33gal |
| Hydraulic Tank | 21.7gal |
| Hydraulic System | 24.8gal |
| Engine Oil | 3gal |
| Travel Speed - High | 3.2mph |
| Travel Speed - Low | 1.8mph |
| Gradeability - Maximum | 30 degrees |
| Ground Pressure | 5.26 psi |
| Note (1) | Each track is driven by one independent 2-speed motor. |
| Note (2) | Drive modules are integrated into the roller frame for total protection. |
| Note (3) | Straight line travel when tracking and operating the front linkage simultaneously. |
