| Boom/Stick Option (Hex) 1 | Arm Length 8ft.3in. ( 2.52m |
|---|---|
| Shipping Length Of Unit | 24.91ft in |
| Max Cutting Height | 28.75ft in |
| Shipping Height Of Unit | 8.76ft in |
| Max Loading Height | 21.67ft in |
| Max Reach Along Ground | 27.08ft in |
| Max Digging Depth | 19.5ft in |
| Boom/Stick Option (Hex) 2 | Arm Length 9ft. 11in. (3.01m ) |
| Ground Clearance | 1.3ft in |
| Height To Top Of Cab | 8.93ft in |
| Width To Outside Of Tracks | 8.5ft in |
| Length Of Track On Ground | 9.45ft in |
| Tail Swing Radius | 6.89ft in |
| Note | *Typically equipped with push block and ripper. |
| Length Of Machine* | 387in |
| Maximum Height | 151in |
| Width | 102 in |
| Width All Wheel Drive (Awd) | 2551 mm |
| Track Gauge | 6.53ft in |
| Shoe Size | 23.63in |
| Ground Pressure | 4.55psi |
| Drawbar Pull | 22050lb |
| Number Of Shoes Per Side | 44 |
| Max Travel Speed | 3.4mph |
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Net Power | 90hp |
| Power Measured @ | 2200rpm |
| Max Torque | 260lb ft |
| Aspiration | turbocharged |
| Displacement | 427.8cu in |
| Torque Measured @ | 1400rpm |
| Bore | 4.1in |
| Stroke | 5.3in |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV – U.S. EPA Tier 3/EU Stage IIIA |
| Engine Model | Cat 7.1 |
| Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Power as declared per ISO 14396 |
| Derating Altitude | 9842.5ft in |
| Standard Capability | 122degrees |
| Torque Rise - Iso 9294 | 42% |
| Maximum Torque - Awd On | 611lb ft |
| Derating Altitude (Awd) | 5499ft in |
| Maximum Torque - Iso 9249 | 606lb ft |
| Operating Weight | 26790lb |
| Fuel Capacity | 66gal |
| Cooling System Fluid Capacity | 5.9gal |
| Engine Oil Capacity | 3.5gal |
| Operating Voltage | 24V |
| Swing Drive Fluid Capacity | 0.8gal |
| Alternator Supplied Amperage | 45amps |
| Hydraulic Pump Flow Capacity | 26.7gal/min |
| Swing Speed | 12.7rpm |
| Swing Torque | 22415lb ft |
| Reference Bucket Capacity | 1.1yd3 |
| Cutting Edge | 6 in |
| Blade Width | 12ft in |
| Arc Radius | 16.3in |
| Throat Clearance | 4.1in |
| End Bit | 6in |
| Blade Height | 24in |
| Cooling System | 14gal |
| Fuel Tank | 65gal |
| Engine Crankcase | 4.8gal |
| Hydraulic System | 25.6gal |
| Circle Drive | 1.8gal |
| Note (1) | *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Joystick Weight* Tier 4 | 35.4lb |
| Joystick Weight* Tier 3 | 34.9lb |
| Maximum Lift Above Ground | 16.1in |
| Maximum Depth Of Cut | 30.5in |
| Maximum Shoulder Reach Left | 69.4in |
| Moldboard Side Shift Left | 20.1in |
| Moldboard Side Shift Right | 26.1in |
| Circle Center Shift Left | 26in |
| Circle Center Shift Right | 26in |
| Blade Tip Range Forward | 40 |
| Blade Tip Range Backward | 5 |
