| Tail Swing | 31in |
|---|---|
| Swing Bearing Height | 22in |
| Maximum Reach | 195in |
| Maximum Reach @ Ground Level | 15.75ft in |
| Overall Shipping Height | 98in |
| Boom In Reach | 83in |
| Overall Shipping Length | 176in |
| Boom Swing Right | 32in |
| Overall Track Width | 60in |
| Maximum Blade Depth | 19in |
| Vertical Wall | 77in |
| Maximum Blade Height | 16in |
| Maximum Dig Height | 14.84ft in |
| Track Belt/Shoe Width | 12in |
| Maximum Dump Clearance | 124in |
| Number Of Carrier Rollers | 1 |
| Number Of Track Rollers | 4 |
| Track Roller Type | Center Flange |
| Machine Swing Speed | 9rpm |
| Boom Swing Left | 80 degrees |
| Gross Power | 24.8hp |
| Net Power | 23.5hp |
| Displacement | 77cu in |
| Bore | 3.1in |
| Stroke | 3.5in |
| Engine Model | Cat C1.3 |
| Gross Power - Iso 14396 | 24.8hp |
| Operating Weight - With Cab | 7204lb |
| Height | 13in |
| Width | 5ft in |
| Hydraulic System Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Lift Height | 16in |
| Dig Depth | 19in |
| Operating Pressure - Swing | 2625 psi |
| Operating Pressure - Travel | 3553 psi |
| Digging Force - Stick - Long | 3327lb |
| Digging Force - Bucket | 6385lb |
| Pump Flow At 2,400 Rpm | 23.1 gal/min |
| Stick Length - Standard | 50in |
| Stick Length - Long | 61in |
| Cooling System | 1.2gal |
| Fuel Tank | 11.9gal |
| Hydraulic Tank | 12.4gal |
| Hydraulic System | 17.2gal |
| Engine Oil | 1.5gal |
| Travel Speed - High | 2.8mph |
| Travel Speed - Low | 1.5mph |
| Top Guard | ISO 10262:1998 (Level I) |
| Blade Down - Front | 1632lb |
| Blade Up - Front | 904lb |
| Blade Down - Side | 750lb |
| Blade Up - Side | 662lb |
| Note | *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Theexcava |
