| Overall Length | 33.13ft in |
|---|---|
| Width Over Tires | 8.08ft in |
| Wheelbase | 20.24ft in |
| Tandem Axle Wheelbase | 5ft in |
| Height To Top Of Isomount Cab | 11.02ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 200hp |
| Engine Make | 2236 |
| Engine Model | 3176C ATAAC |
| Net Power Gear 1-2 | 180hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 200hp |
| Torque Measured @ | 1000rpm |
| Max Power | 200hp |
| Net Power Gears 7-8 | 200hp |
| Net Torque Gears 7-8 | 840.9lb ft |
| Displacement | 628.6cu in |
| Std Operation Weight - Total | 35891.3lb |
| Max Operation Weight - Total | 51325.9lb |
| Fuel Capacity | 104.9gal |
| Cooling System Fluid Capacity | 10.1gal |
| Circle Gearbox Fluid Capacity | 1.9gal |
| Tire Size | 10-24 12PR |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 35amps |
| Articulation Angle | 20degrees |
| Turning Radius | 24.3ft in |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 27.1mph |
| Max Speed - Reverse | 21.4mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Moldboard Width | 14ft in |
| Moldboard Height | 27.1in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 30.4in |
| Side Shift Left | 33.6in |
| Side Shift Right | 37.2in |
| Blade Pull At Max Weight | 44249lb |
| Blade Down Pressure | 30441.5lb |
| Pump Type | axial piston |
| Pump Flow | 68.7gal/min |
| Relief Valve Pressure | 3502.7psi |
| Shift Left | 33.4in |
| Shift Right | 34.7in |
| Max Reach Outside Tires - Left | 87.6in |
| Max Reach Outside Tires - Right | 89.1in |
| Max Lift Above Ground | 17.8in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
