| Overall Length | 32.79ft in |
|---|---|
| Width Over Tires | 10.08ft in |
| Wheelbase | 22.83ft in |
| Rear Ground Clearance | 1.34ft in |
| Tandem Axle Wheelbase | 6ft in |
| Front Ground Clearance | 2.4ft in |
| Blade Base | 10.08ft in |
| Height To Top Of Isomount Cab | 11.58ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 285hp |
| Engine Make | 2236 |
| Engine Model | 3196 ETA |
| Net Power Gear 1-2 | 265hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 285hp |
| Max Power | 285hp |
| Net Power Gears 7-8 | 285hp |
| Net Torque Gears 7-8 | 1143lb ft |
| Displacement | 726cu in |
| Std Operation Weight - Total | 54550lb |
| Max Operation Weight - Total | 69648lb |
| Fuel Capacity | 130gal |
| Cooling System Fluid Capacity | 12.3gal |
| Circle Gearbox Fluid Capacity | 2.1gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 75amps |
| Articulation Angle | 20degrees |
| Turning Radius | 27ft in |
| Transmission Type | direct drive, power shift, planetary |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Max Speed - Forward | 29.9mph |
| Max Speed - Reverse | 28.4mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.4ft in |
| Moldboard Width | 16ft in |
| Moldboard Height | 31in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 18.5in |
| Side Shift Left | 25.6in |
| Side Shift Right | 31.1in |
| Blade Pull At Max Weight | 45131lb |
| Blade Down Pressure | 34901.4lb |
| Pump Type | axial piston |
| Pump Flow | 66gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 71.8in |
| Shift Left | 27.2in |
| Shift Right | 22in |
| Max Reach Outside Tires - Left | 91in |
| Max Reach Outside Tires - Right | 91in |
| Max Lift Above Ground | 16.5in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
