| Overall Length | 28.51ft in |
|---|---|
| Wheelbase | 20.5ft in |
| Blade Base | 8.92ft in |
| Overall Height With Cab | 11.5ft in |
| Overall Width | 9.17ft in |
| Tread Width | 90.99in |
| Torque | 630lb ft |
| Number Of Cylinders | 6 |
| Gross Horsepower | 215hp |
| Engine Make | Cummins |
| Engine Model | LT-10-C |
| Net Power | 200hp |
| Power Measured @ | 2100rpm |
| Torque Measured @ | 1300rpm |
| Displacement | 610.3cu in |
| Bore | 5in |
| Stroke | 5.4in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 40600lb |
| Oil System Fluid Capacity | 10.4gal |
| Fuel Capacity | 100gal |
| Cooling System Fluid Capacity | 10.8gal |
| Transmission Fluid Capacity | 10.3gal |
| Tire Size | 16.00 * 24, G-2 |
| Articulation Angle | 22degrees |
| Turning Radius | 25.5ft in |
| Transmission Type | powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 24.2mph |
| Max Speed - Reverse | 17.3mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 2.3ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 31in |
| Moldboard Thickness | 1in |
| Side Shift Left | 53.6in |
| Pump Flow | 48.2gal/min |
| Relief Valve Pressure | 2500psi |
| Blade Ground Clearance | 1.6ft in |
| Blade Cutting Depth | 2.1ft in |
| Diameter | 66.7in |
| Rotation | 360degrees |
| Shift Left | 17.6in |
| Blade Tip Angle - Front | 46degrees |
| Blade Tip Angle - Rear | 13degrees |
