| Overall Length | 29.84ft in |
|---|---|
| Width Over Tires | 8.17ft in |
| Wheelbase | 20ft in |
| Blade Base | 8.59ft in |
| Height To Top Of Isomount Cab | 10.09ft in |
| Engine Make | 2244 |
| Engine Model | D7DGAE2 |
| Power Measured @ | 2200rpm |
| Torque Measured @ | 1400rpm |
| Max Power | 173hp |
| Net Power Gears 7-8 | 173hp |
| Net Torque Gears 7-8 | 591lb ft |
| Displacement | 436cu in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 33400.1lb |
| Fuel Capacity | 100gal |
| Cooling System Fluid Capacity | 12.5gal |
| Transmission Fluid Capacity | 10.1gal |
| Tire Size | 13.00 x 24, G-2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 75amps |
| Articulation Angle | 22degrees |
| Transmission Type | powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 24.9mph |
| Max Speed - Reverse | 17.8mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 25in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 32in |
| Side Shift Left | 26.5in |
| Side Shift Right | 26.5in |
| Blade Pull At Max Weight | 20157lb |
| Blade Down Pressure | 16968lb |
| Pump Type | load sensing hydraulic |
| Pump Flow | 75.1gal/min |
| Relief Valve Pressure | 2700psi |
| Diameter | 66.3in |
| Rotation | 360degrees |
| Shift Left | 30.5in |
| Shift Right | 29.5in |
| Max Reach Outside Tires - Left | 79.5in |
| Max Reach Outside Tires - Right | 80.5in |
| Max Lift Above Ground | 17in |
| Blade Tip Angle - Front | 47degrees |
| Blade Tip Angle - Rear | 5degrees |
