| Overall Length | 31.75ft in |
|---|---|
| Width Over Tires | 9.08ft in |
| Wheelbase | 21.75ft in |
| Blade Base | 9.5ft in |
| Height To Top Of Isomount Cab | 10.58ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2244 |
| Engine Model | D9B |
| Power Measured @ | 1700rpm |
| Torque Measured @ | 1550rpm |
| Max Power | 277hp |
| Net Power Gears 7-8 | 277hp |
| Net Torque Gears 7-8 | 929lb ft |
| Displacement | 573cu in |
| Aspiration | Turbocharged, aftercooled |
| Std Operation Weight - Total | 48720lb |
| Max Operation Weight - Total | 60000lb |
| Oil System Fluid Capacity | 10.4gal |
| Fuel Capacity | 132gal |
| Cooling System Fluid Capacity | 12.4gal |
| Transmission Fluid Capacity | 16gal |
| Tire Size | 16:00 x 24, G-2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 80amps |
| Articulation Angle | 21degrees |
| Turning Radius | 26.8ft in |
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 28.1mph |
| Max Speed - Reverse | 19.8mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 24.2ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 31in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 32.5in |
| Side Shift Left | 26.5in |
| Side Shift Right | 26.5in |
| Blade Pull At Max Weight | 37800lb |
| Blade Down Pressure | 24457lb |
| Pump Type | Axial Piston Pump |
| Pump Flow | 55gal/min |
| Relief Valve Pressure | 3000psi |
| Diameter | 64in |
| Rotation | 360degrees |
| Shift Left | 30in |
| Shift Right | 29.5in |
| Max Reach Outside Tires - Left | 89in |
| Max Reach Outside Tires - Right | 89in |
| Blade Tip Angle - Front | 46degrees |
| Blade Tip Angle - Rear | 13degrees |
