| Make | Caterpillar |
|---|---|
| Model | C13 ACERT |
| Tractor | Cat C13 ACERT |
| Maximum Power | 407hp |
| Fuel Capacity | 201.6gal |
| Cooling System Fluid Capacity | 17gal |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 1 |
| Reverse | 5.7 mile/h |
| Steering Angle - Right | 85 |
| Steering Angle - Left | 82 |
| 1 Forward | 3.1mph |
| 2 Forward | 5.5mph |
| 3 Forward | 7.5mph |
| 4 Forward | 10.1mph |
| 5 Forward | 13.6mph |
| 6 Forward | 18.4mph |
| 7 Forward | 24.8mph |
| 8 Forward | 33.5mph |
| Top Speed - Loaded | 33.5mph |
| Total Operating - Loaded | 142701lb |
| Rated Payload | 55200lb |
| Width Of Cut | 10.3ft in |
| Standards | Standards |
| Bowl Cylinder Bore | 5.5in |
| Bowl Cylinder Stroke | 33.3in |
| Ejector Cylinder Bore | 4.3in |
| Ejector Cylinder Stroke | 47.8in |
| Bowl Floor Cylinder Bore | 5.1in |
| Bowl Floor Stroke | 53.3in |
| Steering Cylinder - Bore | 5in |
| Steering Cylinder - Stroke | 44.4in |
| Cushion Hitch Cylinder Bore | 5.5in |
| Steering Circuit Flow | 61.8 gal/min |
| Scraper Circuit Flow | 50.7 gal/min |
| Elevator Circuit Flow | 67.9 gal/min |
| Cushion Hitch Circuit Flow | 10.6 gal/min |
| Rated Load | 55200lb |
| Scraper Capacity - Heaped | 23yd3 |
| Heaped Capacity | 23yd3 |
| Struck Capacity | 18.8yd3 |
| Maximum Depth Of Cut | 10.3in |
| Width - Cut - Outside Router Bits | 123.5in |
| Thickness - Cutting Edge | 0.9in |
| Maximum Depth Of Spread | 18.3in |
| Non-Powered Wheel | 1.1gal |
| Fuel Tank | 201.6gal |
| Engine Crankcase | 8.8gal |
| Transmission | 18.5gal |
| Differential | 45.8gal |
| Final Drive - Each | 5gal |
| Cooling System | 17gal |
| Hydraulic Reservoir | 22gal |
| Windshield Washer Reservoir | 1.3gal |
| Tractor Engine | Cat C13 ACERT |
| Displacement | 763cu in |
| Bore | 5.1in |
| Stroke | 6.2in |
| Shipping Weight - 10% Fuel | 86259lb |
