| Overall Length | 42.25ft in |
|---|---|
| Overall Width | 11.34ft in |
| Overall Height | 12.17ft in |
| Ground Clearance - Tractor | 1.83in |
| Height - Overall Shipping | 146in |
| Height - Scraper Blade Maximum | 21in |
| Height - Top Of Cab | 11.09ft in |
| Length - Overall Machine | 507in |
| Rear Axle - Rear Of Machine | 85in |
| Wheel Base | 25.34ft in |
| Width - Inside Of Bowl | 116in |
| Width - Outside Rear Tires | 120in |
| Width - Overall Machine | 136in |
| Width - Rear Tire Center Lines | 87in |
| Axle To Vertical Hitch Pin | 17in |
| Width - Tractor | 117in |
| Bail Length - Maximum (Push-Pull) | 60in |
| Extended Push Block (Push-Pull) | 110in |
| Net Power | 327hp |
| Tractor Engine | 3306 / 3406C |
| Net Power - Gears 1-2 | 330hp |
| Gross Power - Gears 1-2 | 347hp |
| Scraper Engine | 3306 |
| Make | Caterpillar |
| Model | 3306 |
| Gross Power | 246hp |
| Power Measured @ | 2200rpm |
| Displacement | 638cu in |
| Bore | 4.8in |
| Stroke | 6in |
| Net Power - Gear 1 | 225hp |
| Gross Power - Gear 1 | 246hp |
| Iso 9249 | 225hp |
| Caterpillar Net Power | 225hp |
| Eec 80/1269 | 225hp |
| Sae J1349 | 223hp |
| Fuel Capacity | 262gal |
| Tire Size | 33.25-R29 MX XRB 2 |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 1 |
| Reverse | 5.7 mile/h |
| Width - 180 Degrees Turn | 35.8ft in |
| Steering Angle - Right | 90 degrees |
| Steering Angle - Left | 85 degrees |
| 1 Forward | 3.1mph |
| 2 Forward | 5.6mph |
| 3 Forward | 7.1mph |
| 4 Forward | 9.6mph |
| 5 Forward | 12.9mph |
| 6 Forward | 17.5mph |
| 7 Forward | 23.6mph |
| 8 Forward | 31.9mph |
| Operating Weight | 84050lb |
| Heaped Capacity | 26.2yd3 |
| Struck Capacity | 18.4yd3 |
| Width Of Cut | 10ft in |
| Bowl Cylinder Bore | 6in |
| Bowl Cylinder Stroke | 32in |
| Steering Circuit | 52 gal/min |
| Scraper Circuit | 65.5 gal/min |
| Cushion Hitch Circuit | 9.2 gal/min |
| Relief Valve - Steering Circuit | 2250 psi |
| Ejector Cylinder Bore | 6.5in |
| Ejector Cylinder Stroke | 61in |
| Secondary Steering Circuit | 37 gal/min |
| Apron Cylinder Bore | 7.3in |
| Apron Cylinder Stroke | 24in |
| Width - Cut - To Router Bits | 119in |
| Rated Load | 48000lb |
| Capacity - Struck | 14yd3 |
| Depth Of Cut - Maximum | 13.1in |
| Ground Clearance - Maximum | 20.6in |
| Cutting Edge Thickness | 1.2in |
| Depth Of Spread - Maximum | 20.6in |
| Scraper Capacity - Heaped | 20yd3 |
| Hyd. Penetration Force - 621g | 48375lb |
| Apron Closure Force | 24075lb |
| Apron Opening | 70in |
| Transmission | 19gal |
| Differential | 43gal |
| Final Drive - Each | 5gal |
| Cooling System | 22gal |
| Hydraulic Reservoir | 37gal |
| Crankcase | 9.5gal |
| Wheel Coolant - Each | 12gal |
| Total Shipping | 83768lb |
| Tractor Shipping | 51098lb |
| Scraper Shipping | 32669lb |
| Total Operating - Empty | 84050lb |
| Front Axle | 49590lb |
| Rear Axle | 34460lb |
| Total Operating - Loaded | 132057lb |
| Front Axle Weight - Loaded | 64708lb |
| Rear Axle - Weight - Loaded | 67350lb |
