| Power Measured @ | 1700rpm |
|---|---|
| Tractor | Cat C13 ACERT |
| Scraper | Cat C9.3 ACERT |
| Make | Caterpillar |
| Model | C9.3 ACERT |
| Gross Power | 290hp |
| Maximum Power | 290hp |
| Fuel Capacity | 336gal |
| Cooling System Fluid Capacity | 19gal |
| Engine Oil Fluid Capacity | 7.5gal |
| Transmission Fluid Capacity | 13gal |
| Differential Fluid Capacity | 14gal |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 1 |
| Max Speed - Forward | 33.5mph |
| Max Speed - Reverse | 5.7mph |
| Reverse | 5.7 mile/h |
| Steering Angle - Right | 85 |
| Steering Angle - Left | 82 |
| 1 Forward | 3.1mph |
| 2 Forward | 5.5mph |
| 3 Forward | 7.5mph |
| 4 Forward | 10.1mph |
| 5 Forward | 13.6mph |
| 6 Forward | 18.4mph |
| 7 Forward | 24.8mph |
| 8 Forward | 33.5mph |
| Top Speed - Loaded | 33.5mph |
| Max Depth Of Cut | 12.4in |
| Width Of Cut | 123.5ft in |
| Standards | Standards |
| Bowl Cylinder Bore | 5.5in |
| Bowl Cylinder Stroke | 33.3in |
| Ejector Cylinder Bore | 5.5in |
| Ejector Cylinder Stroke | 61in |
| Steering Circuit Flow | 61.8 gal/min |
| Scraper Circuit Flow | 66 gal/min |
| Cushion Hitch Circuit Flow | 10.6 gal/min |
| Apron Cylinder Bore | 5.9in |
| Apron Cylinder Stroke | 22.2in |
| Rated Load | 57600lb |
| Scraper Capacity - Heaped | 24yd3 |
| Heaped Capacity | 24yd3 |
| Struck Capacity | 17.1yd3 |
| Maximum Depth Of Cut | 12.4in |
| Thickness - Cutting Edge | 0.9in |
| Maximum Depth Of Spread | 21.3in |
| Maximum Apron Opening | 69.6in |
| Maximum Apron Closure Force | 50580lb |
| Fuel Tank | 336gal |
| Engine Crankcase | 8.8gal |
| Transmission | 18.5gal |
| Differential | 45.8gal |
| Final Drive - Each | 5gal |
| Cooling System | 17gal |
| Hydraulic Reservoir | 22gal |
| Windshield Washer Reservoir | 1.3gal |
| Tractor Engine | Cat C9.3 ACERT |
| Displacement | 567cu in |
| Bore | 4.5in |
| Stroke | 5.9in |
