| Overall Length | 47.78ft in |
|---|---|
| Overall Width | 12.92ft in |
| Overall Height | 14.07ft in |
| Wheelbase | 28.77ft in |
| Tractor Ground Clearance | 2.19ft in |
| Height To Top Of Cab | 12.19ft in |
| Length - Overall Machine | 573.4in |
| Rear Axle - Rear Of Machine | 95.8lb/in |
| Wheel Base | 345.25lb/in |
| Width - Inside Of Bowl | 134in |
| Width - Outside Rear Tires | 143.2in |
| Width - Overall Machine | 155lb/in |
| Width - Rear Tire Center Lines | 97lb/in |
| Axle To Vertical Hitch Pin | 21.6in |
| Width - Tractor | 137in |
| Ground Clearance - Tractor | 26.2lb/in |
| Height - Overall Shipping | 167.75in |
| Height - Scraper Blade Maximum | 21.5in |
| Height - Top Of Cab | 146.25lb/in |
| Make | Caterpillar |
| Model | 3408E |
| Gross Power | 515hp |
| Displacement | 1099cu in |
| Tractor Engine | 3408E |
| Net Power - Gears 1-2 | 450hp |
| Gross Power - Gears 1-2 | 480hp |
| Caterpillar Net Power | 490hp |
| Iso 9249 | 490hp |
| Eec 80/1269 | 490hp |
| Sae J1349 | 490hp |
| Bore | 5.4lb/in |
| Stroke | 6lb/in |
| Net Power - Gears 3-8 | 490hp |
| Gross Power - Gears 3-8 | 515hp |
| Net Power - Tractor/Scraper | 336 kW (450 hp) |
| Fuel Capacity | 215.1gal |
| Cooling System Fluid Capacity | 32gal |
| Engine Oil Fluid Capacity | 11.7gal |
| Transmission Fluid Capacity | 33gal |
| Differential Fluid Capacity | 36gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 75amps |
| Tire Size | 37.50-R35 |
| Transmission Type | 8-speed automatic powershift with electronic control |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 1 |
| Max Speed - Forward | 33.2mph |
| Max Speed - Reverse | 6.2mph |
| Width - 180 Degrees Turn | 40.1ft in |
| Steering Angle - Right | 90 degrees |
| Steering Angle - Left | 85 degrees |
| Hydraulic Output | 96.2 gal/min |
| Top Speed - Loaded | 33mph |
| Operating Weight | 102460lb |
| Front Axle - Empty | 68647.5% |
| Rear Axle - Empty | 33812.3% |
| Front Axel - Loaded | 94054lb |
| Rear Axle - Loaded | 83406% |
| Rated Payload | 75000lb |
| Heaped Capacity | 31yd3 |
| Struck Capacity | 21yd3 |
| Max Depth Of Cut | 17.2in |
| Width Of Cut | 11.6ft in |
| Brakes | Meets ISO 3450: 1996 standard |
| Rops/Fops | Meets SAE J320a, SAE J1040 MAY 94, and ISO 3471-1994 |
| Cab | Meets ANSI, SAE |
| Bowl Cylinder Bore | 7.2in |
| Bowl Cylinder Stroke | 34.4in |
| Steering Circuit | 103 gal/min |
| Scraper Circuit | 91 gal/min |
| Cushion Hitch Circuit | 9 gal/min |
| Relief Valve - Steering Circuit | 1987 psi |
| Ejector Cylinder Bore | 8.3in |
| Ejector Cylinder Stroke | 74in |
| Secondary Steering Circuit | 77 gal/min |
| Apron Cylinder Bore | 8.2in |
| Apron Cylinder Stroke | 28.6in |
| Capacity - Heaped | 34yd3 |
| Width - Cut - To Router Bits | 138.3lb/in |
| Rated Load | 75000lb |
| Capacity - Struck | 21yd3 |
| Depth Of Cut - Maximum | 17.2lb/in |
| Ground Clearance - Maximum | 21.5in |
| Cutting Edge Thickness | 1.7in |
| Depth Of Spread - Maximum | 18.9in |
| Scraper Capacity - Heaped | 31yd3 |
| Hyd. Penetration Force - 621g | 57375lb |
| Apron Closure Force | 38250lb |
| Apron Opening | 79in |
| Hyd. Penetration Force - 631g | 57375lb |
| Transmission | 33gal |
| Differential | 36gal |
| Final Drive - Each | 7gal |
| Cooling System | 32gal |
| Hydraulic Reservoir | 50gal |
| Crankcase | 11.7gal |
| Wheel Coolant - Each | 19.5gal |
| Windshield Washer | 6gal |
| Fuel Tank - 631g | 215.1gal |
| Total Shipping | 100006lb |
| Tractor Shipping | 46002lb |
| Scraper Shipping | 54004lb |
| Total Operating - Empty | 102460lb |
| Front Axle | 68648lb |
| Rear Axle | 33812lb |
| Total Operating - Loaded | 177460lb |
| Front Axle Weight - Loaded | 94054lb |
| Rear Axle - Weight - Loaded | 83406lb |
| 1 Forward | 2.9mph |
| 2 Forward | 5.2mph |
| 3 Forward | 7.4mph |
| 4 Forward | 10mph |
| 5 Forward | 13.4mph |
| 6 Forward | 18.2mph |
| 7 Forward | 24.5mph |
| 8 Forward | 33.2mph |
| Reverse | 6.2mph |
