| Overall Length | 48.56ft in |
|---|---|
| Overall Width | 13ft in |
| Overall Height | 13.92ft in |
| Wheelbase | 29.6ft in |
| Length - Overall Machine | 583.21in |
| Rear Axle - Rear Of Machine | 95.75in |
| Wheel Base | 29.6ft in |
| Width - Inside Of Bowl | 134in |
| Width - Outside Rear Tires | 143.2in |
| Width - Overall Machine | 159.5in |
| Width - Rear Tire Center Lines | 97in |
| Width - Tractor | 137in |
| Height - Overall Shipping | 166.9in |
| Height - Scraper Blade Maximum | 17.7in |
| Height - Top Of Cab | 12.2ft in |
| Model | 3408TA |
| Gross Power | 490hp |
| Net Power | 450hp |
| Bore | 5.4in |
| Stroke | 6in |
| Eec 80/1269 | 490hp |
| Sae J1349 | 485hp |
| Iso 9249 | 490hp |
| Din 70020 | 508 PS |
| Tractor Engine | 3408E |
| Gross Power - Gears 1-2 | 475hp |
| Net Power - Gears 1-2 | 450hp |
| Gross Power - Gears 3-8 | 515hp |
| Net Power - Gears 3-8 | 490hp |
| Caterpillar Net Power | 490hp |
| Displacement | 49673.4cu in |
| Max Speed - Forward | 33mph |
| Reverse | 6.2 mile/h |
| Width - 180 Degrees Turn | 40.1ft in |
| Steering Angle - Right | 90 degrees |
| Steering Angle - Left | 85 degrees |
| Hydraulic Output | 96.2 gal/min |
| 1 Forward | 3mph |
| 2 Forward | 5.3mph |
| 3 Forward | 7.4mph |
| 4 Forward | 10.1mph |
| 5 Forward | 13.5mph |
| 6 Forward | 18.3mph |
| 7 Forward | 24.7mph |
| 8 Forward | 33.4mph |
| Total Operating - Empty | 112678.3lb |
| Total Shipping | 111158lb |
| Tractor Shipping | 46200lb |
| Scraper Shipping | 64958lb |
| Front Axle | 72051lb |
| Rear Axle | 40529lb |
| Front Axle Weight - Loaded | 99236lb |
| Rear Axle - Weight - Loaded | 95344lb |
| Rated Payload | 82012lb |
| Heaped Capacity | 34.1yd3 |
| Struck Capacity | 23.2yd3 |
| Max Depth Of Cut | 24.1in |
| Width Of Cut | 11.5ft in |
| Number Of Flights | 14 |
| Width - Flight Face | 9.8in |
| Length - Flights | 113.8in |
| Spacing Of Flights | 24in |
| Length - Overall | 177.1in |
| Cooling System | 33gal |
| Fuel Tank | 215gal |
| Crankcase | 11.7gal |
| Final Drive - Each | 7gal |
| Transmission | 33gal |
| Differential | 36gal |
| Hydraulic Reservoir | 50gal |
| Wheel Coolant - Each | 19.5gal |
| Bowl Cylinder Bore | 7.3in |
| Bowl Cylinder Stroke | 20in |
| Floor Cylinder Bore | 6.3in |
| Floor Cylinder Stroke | 52.3in |
| Steering Circuit | 103 gal/min |
| Scraper Circuit | 91 gal/min |
| Cushion Hitch Circuit | 9 gal/min |
| Relief Valve - Steering Circuit | 1960 psi |
| Ejector Cylinder Bore | 6.5in |
| Ejector Cylinder Stroke | 61.1in |
| Hydraulic Penetration Force | 87608lb |
| Width - Cut - To Router Bits | 11.5in |
| Rated Load | 82000lb |
| Capacity - Struck | 23.2yd3 |
| Depth Of Cut - Maximum | 17in |
| Ground Clearance - Maximum | 19.8in |
| Cutting Edge Thickness | 1.4in |
| Depth Of Spread - Maximum | 22.8in |
| Scraper Capacity - Heaped | 34yd3 |
