| Width Over Tracks | 5.5ft in |
|---|---|
| Height To Top Of Cab | 6.53ft in |
| Ground Clearance | 10in |
| Reach At Max Lift And Dump | 2.06ft in |
| Length - Track On Ground | 59in |
| Length With Bucket On Ground | 129in |
| Length - Without Bucket | 99in |
| Length With Out Bucket | 8.27ft in |
| Departure Angle | 41 degrees |
| Height - Top Of Cab | 6.5ft in |
| Vehicle Width | 66in |
| Length With Bucket | 10.78ft in |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 150in |
| Overall Length - Track | 75in |
| Reach At Maximum Lift/Dump | 25in |
| Turn Radius From Center - Rear | 54in |
| Length Of Track On Ground | 4.92ft in |
| Engine Make | 2236 |
| Gross Power | 62hp |
| Net Power | 56hp |
| Displacement | 134cu in |
| Bore | 3.3in |
| Stroke | 3.9in |
| Gross Power - Sae J1995 | 62hp |
| Engine Model | Cat C2.2 T |
| Net Power - Iso 9249 Eec | 56hp |
| Net Power - Sae 1349 | 56hp |
| Cooling System Fluid Capacity | 2.7gal |
| Fuel Capacity | 17.2gal |
| Engine Oil Capacity | 2.7gal |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 85amps |
| Max Speed - Low Range | 7mph |
| Travel Speed Forward | 7mph |
| Travel Speed Reverse | 7mph |
| Breakout Force | 4060lb |
| Operating Load | 2149.6lb |
| Tipping Angle | 4299.1degrees |
| Operating Weight | 6997lb |
| Pump Flow | 16.2gal/min |
| Relief Valve Pressure | 3335psi |
| Hydraulic Power | 31hp |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 16 gal/min |
| Hydraulic Flow | Standard |
| Ground Contact Area | 1770in2 |
| Ground Pressure | 4 psi |
| Tipping Load | 4300lb |
| Breakout Force - Tilt Cylinder | 4060lb |
| Cooling System | 2.6gal |
| Fuel Tank | 17gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.6gal |
| Hydraulic System | 14.5gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
