| Ground Clearance | 0.72ft in |
|---|---|
| Bucket Pin Reach - Maximum Lift | 15.6in |
| Departure Angle | 31 degrees |
| Height - Top Of Cab | 6.97ft in |
| Length - Track On Ground | 71.1in |
| Length With Bucket On Ground | 152.2in |
| Length - Without Bucket | 124.2in |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 158.4in |
| Overall Length - Track | 90in |
| Reach At Maximum Lift/Dump | 30.6in |
| Turn Radius From Center - Rear | 73.2in |
| Vehicle Width | 76.2in |
| Net Power | 95hp |
| Displacement | 232cu in |
| Bore | 3.9in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 98hp |
| Engine Model | Cat C3.8 DIT (Turbo) |
| Net Power - Iso 9249 Eec | 71hp |
| Net Power - Sae 1349 | 71hp |
| Operating Weight | 10120lb |
| Travel Speed Forward | 5.9mph |
| Travel Speed Reverse | 5.9mph |
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 44hp |
| Maximum Loader Hydraulic Flow | 32 gal/min |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 23 gal/min |
| Hydraulic Flow (2) | High Flow XPS |
| Hydraulic Power - Calculated | 76hp |
| Ground Contact Area | 2233in2 |
| Ground Pressure | 4.5 psi |
| Tipping Load | 9100lb |
| Breakout Force - Tilt Cylinder | 7491lb |
| Cooling System | 4.1gal |
| Fuel Tank | 32.2gal |
| Hydraulic Tank | 10.3gal |
| Engine Crankcase | 3.5gal |
| Hydraulic System | 14.5gal |
| Rops | ISO 3471:2008 |
| Fops | ISO 3449:2005 Level I |
| Fops Level Ii | ISO 3449:2005 Level II |
