| Ground Clearance | 0.73ft in |
|---|---|
| Bucket Pin Reach - Maximum Lift | 16.11in |
| Departure Angle | 39 degrees |
| Height - Top Of Cab | 6.98ft in |
| Length - Track On Ground | 69.6in |
| Length With Bucket On Ground | 151.6in |
| Length - Without Bucket | 123.5in |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 159.4in |
| Overall Length - Track | 89.4in |
| Reach At Maximum Lift/Dump | 31in |
| Turn Radius From Center - Rear | 72.8in |
| Vehicle Width | 76in |
| Gross Power | 110hp |
| Net Power | 106hp |
| Displacement | 232cu in |
| Bore | 3.9in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 110hp |
| Engine Model | Cat C3.8 (turbocharged) |
| Net Power - Sae 1349 | 106hp |
| Operating Weight | 11647lb |
| Travel Speed Forward - 2-Speed | 8.5mph |
| Travel Speed Reverse - 2-Speed | 8.5mph |
| Travel Speed Forward | 5mph |
| Travel Speed Reverse | 5mph |
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 44hp |
| Maximum Loader Hydraulic Flow | 40 gal/min |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 23 gal/min |
| Hydraulic Flow (2) | XHP |
| Hydraulic Power - Calculated | 94hp |
| Ground Contact Area | 2184in2 |
| Ground Pressure | 5.3 psi |
| Tipping Load | 9100lb |
| Breakout Force - Tilt Cylinder | 7381lb |
| Breakout Force - Lift Cylinder | 6100lb |
| Cooling System | 3.7gal |
| Fuel Tank | 30.8gal |
| Hydraulic Tank | 10.3gal |
| Engine Crankcase | 2.6gal |
| Hydraulic System | 16gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
