| Length With Bucket | 11.25ft in |
|---|---|
| Width Over Tires | 5ft in |
| Ground Clearance | 5.7in |
| Height To Top Of Cab | 6.42ft in |
| Wheelbase | 3.58ft in |
| Length W/O Bucket | 9.06ft in |
| Reach At Max Lift And Dump | 30in |
| Length With Bucket On Ground | 135in |
| Length - Without Bucket | 108.7in |
| Maximum Dump Angle | 50 degrees |
| Reach - Maximum Lift/Dump | 30in |
| Maximum Overall Height | 153.31in |
| Bucket Pin Reach - Maximum Lift | 285in |
| Bumper Overhang - Rear Axle | 38.9in |
| Departure Angle | 28 degrees |
| Height - Top Of Cab | 6.42ft in |
| Vehicle Width Over Tires | 60in |
| Wheel Base | 3.59ft in |
| Turn Radius From Center - Rear | 60.8in |
| Tipping Load | 3956lb |
| Breakout Force - Tilt Cylinder | 4060lb |
| Rated Operating Capacity | 1900lb |
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Gross Power | 61hp |
| Net Power | 57hp |
| Power Measured @ | 2600rpm |
| Displacement | 134cu in |
| Bore | 3.3in |
| Stroke | 3.9in |
| Gross Power - Sae J1995 | 61hp |
| Engine Model | Cat C2.2 T |
| Net Power - Sae 1349 | 56hp |
| Net Flywheel Power | 56hp |
| Operational Weight | 6737lb |
| Fuel Capacity | 15.3gal |
| Cooling System Fluid Capacity | 2.6gal |
| Engine Oil Fluid Capacity | 2.6gal |
| Max Speed | 6.8mph |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 65amps |
| Travel Speed Forward | 6.8mph |
| Travel Speed Reverse | 6.8mph |
| Breakout Force | 4060lb |
| Operating Load Rating | 1900lb |
| Tipping Angle | 3956degrees |
| Bucket Capacity | 0.5yd3 |
| Operating Weight | 6737lb |
| Pump Flow Capacity | 15.6gal/min |
| Relief Valve Pressure | 3335psi |
| Hydraulic Power | 30.4hp |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 15.6 gal/min |
| Hydraulic Flow | Standard |
| Cooling System | 2.6gal |
| Fuel Tank | 15.3gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.6gal |
| Hydraulic System | 14.5gal |
| Chain Box - Each Side | 1.6gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
