| Length With Bucket | 11.87ft in |
|---|---|
| Width Over Tires | 6ft in |
| Ground Clearance | 7.7in |
| Height To Top Of Cab | 6.88ft in |
| Wheelbase | 4.02ft in |
| Length W/O Bucket | 9.52ft in |
| Reach At Max Lift And Dump | 32.6in |
| Length With Bucket On Ground | 142in |
| Length - Without Bucket | 114in |
| Maximum Dump Angle | 51 degrees |
| Reach - Maximum Lift/Dump | 33in |
| Maximum Overall Height | 160in |
| Bucket Pin Reach - Maximum Lift | 13.7in |
| Bumper Overhang - Rear Axle | 41in |
| Departure Angle | 26.4 degrees |
| Height - Top Of Cab | 6.84ft in |
| Vehicle Width Over Tires | 72in |
| Wheel Base | 4ft in |
| Turn Radius From Center - Rear | 67in |
| Tipping Load | 5000lb |
| Breakout Force - Tilt Cylinder | 5508lb |
| Rated Operating Capacity | 2500lb |
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Gross Power | 75hp |
| Net Power | 70hp |
| Power Measured @ | 2600rpm |
| Displacement | 201cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Gross Power - Sae J1995 | 75hp |
| Engine Model | Cat C3.4 DIT |
| Net Power - Sae 1349 | 71hp |
| Net Flywheel Power | 71hp |
| Operational Weight | 7861lb |
| Fuel Capacity | 23.8gal |
| Cooling System Fluid Capacity | 2.6gal |
| Engine Oil Fluid Capacity | 2.6gal |
| Max Speed | 7mph |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 90amps |
| Travel Speed Forward | 7mph |
| Travel Speed Reverse | 7mph |
| Breakout Force | 5508lb |
| Operating Load Rating | 2500lb |
| Tipping Angle | 5501degrees |
| Bucket Capacity | 0.5yd3 |
| Operating Weight | 7861lb |
| Pump Flow Capacity | 22gal/min |
| Relief Valve Pressure | 3335psi |
| Hydraulic Power | 42.8hp |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow | Standard |
| Cooling System | 2.6gal |
| Fuel Tank | 23.8gal |
| Hydraulic Tank | 9.2gal |
| Engine Crankcase | 2.4gal |
| Hydraulic System | 14gal |
| Chain Box - Each Side | 2.1gal |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
