| Height To Top Of Rops | 96.86in |
|---|---|
| Overall Width | 78.35in |
| Wheelbase 2wd | 84.65in |
| Wheelbase 4wd | 87.01in |
| Description | Swinging |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 3 |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 65hp |
| Maximum Engine Power | 65hp |
| Pto Horsepower | 57hp |
| Pto Speed | 540rpm |
| Pto Operational Type | Independent |
| Block Design | Parent bore block |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 65A (2010-2015) |
| Rated Engine Speed | 2500rpm |
| Fuel Tank Capacity | 16.4gal |
| Displacement | 195.3cu in |
| Bore | 3.9in |
| Stroke | 4.1in |
| Aspiration | turbocharged |
| Alternator | 65amps |
| Fuel System | Rotary-Distributor Type |
| Manufacturers Description | 8×2 Partially Synchronized |
| Transmission Type | Gear |
| Maximum Speed Forward | 19mph |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 2 |
| Weight With Maximum Ballast | 6816.7lb |
| Weight 2wd With Rops | 5059.7lb |
| Weight 4wd With Rops | 5688lb |
| Front | 11.2×24 6PR R1 |
| Rear | 16.9×30, 6PR R1 |
| Hydraulic System Type | Open center |
| Axle Output End | Flange |
| Implement Pump Flow | 10.4gal/min |
| Pump Type | Fixed Displacement Gear Pump |
| Final Drive | Outboard pinion & bull gear |
| Category | Category 2 or 1 |
| Lift Capacity @ 24” | 2954.2lb |
| Draft Sensing | Top Link – Mechanical |
| Service Brake | Wet disc |
