| Height To Top Of Cab | 98in |
|---|---|
| Height To Top Of Rops | 104.41in |
| Overall Width At Fenders | 83in |
| Wheelbase 2wd | 85.83in |
| Wheelbase 4wd | 83.94in |
| Description | Swinging |
| System | 12V |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 4B / Final |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 74hp |
| Maximum Engine Power | 74hp |
| Pto Horsepower | 65hp |
| Pto Operational Type | Fully independent |
| Block Design | Parent bore block |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 75C (2015-Present) |
| Rated Engine Speed | 2300rpm |
| Fuel Tank Capacity | 23.8gal |
| Displacement | 207cu in |
| Bore | 3.9in |
| Stroke | 4.4in |
| Aspiration | Wastegate turbocharged |
| Alternator | 120amps |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 8×8 Mechanical Shuttle |
| Transmission Type | 4 Synchronized gears, 2 non-synch ranges |
| Maximum Speed Forward | 20.1mph |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 8 |
| Weight Without Ballast | 6239.1lb |
| Weight With Maximum Ballast | 7337lb |
| Weight 2wd With Cab | 5621.8lb |
| Weight 2wd With Rops | 5026.6lb |
| Weight 4wd With Rops | 5952.5lb |
| Front | 11.2 R24, R1W |
| Rear | 16.9 R30, R1W |
| Hydraulic System Type | Open center |
| Axle Output End | Flange |
| Implement Pump Flow | 12.5gal/min |
| Pump Type | Gear |
| Final Drive | Inboard Planetary |
| Category | Category 2 or 1 |
| Lift Capacity @ 24” | 3664.1lb |
| Draft Sensing | Top link sensing |
| Service Brake | Wet disc |
