| Height To Top Of Cab | 91.7in |
|---|---|
| Height To Top Of Rops | 90.04in |
| Overall Width | 1342 to 1356(mm) |
| Wheelbase 2wd | 95.99in |
| Wheelbase 4wd | 95.99in |
| Description | Swinging |
| System | 12V |
| Alternator | 120amps |
| Fuel Injection | Direct |
| Fan Drive Method | Belt |
| Emissions Level | Tier 4A (Interim) |
| Number Of Cylinders | 4 |
| Advertised Rated Engine Power | 74hp |
| Maximum Engine Power | 74hp |
| Pto Horsepower | 62hp |
| Pto Operational Type | Independent |
| Block Design | Parent bore |
| Engine Make | Case IH FPT |
| Engine Model | Farmall 80N Narrow (2016-Present) |
| Rated Engine Speed | 2300rpm |
| Fuel Tank Capacity | 19gal |
| Displacement | 207.5cu in |
| Bore | 3.9in |
| Stroke | 4.4in |
| Aspiration | Turbocharged/Air-to-Air Aftercooled |
| Fuel System | High Pressure Common Rail |
| Manufacturers Description | 16×16 Mechanical Synchro Shuttle |
| Transmission Type | 4 synchronized speeds in 4 non-synchro ranges |
| Maximum Speed Forward | 24.9mph |
| Number Of Forward Gears | 16 |
| Number Of Reverse Gears | 16 |
| Weight Without Ballast | 6093.6lb |
| Weight With Maximum Ballast | 6812.3lb |
| Weight 2wd With Cab | 5613lb |
| Weight 2wd With Rops | 5300lb |
| Weight 4wd With Rops | 6243.5lb |
| Front | 7.50 R18, R1 |
| Rear | 14.9 R28, 380/85 R28, R1 |
| Optional Pump Flow | 21.2gal/min |
| Hydraulic System Type | Open center |
| Axle Output End | Flange |
| Implement Pump Flow | 17gal/min |
| Pump Type | Gear, dual-pump |
| Final Drive | Planetary or Inboard |
| Category | Category 1 and 2 |
| Lift Capacity @ 24” | 3781lb |
| Draft Sensing | Mechanical or electronic draft control |
| Service Brake | Wet disc |
