| Wheelbase | 63ft in |
|---|---|
| Front Axle Clearance | 12.45in |
| Limited Slip Differential | No |
| Shipping Weight | 813.5 kg |
| Turning Radius Without Brakes | 8.7ft in |
| Number Of Cylinders | 3 |
| Rated Engine Speed | 3200 rpm |
| Engine Model | 3TNV80F-NCJT |
| Engine Manufacturer | Yanmar |
| Family | GYDXL1.27NS1, HYDXL1.27NS1 |
| Power Take-Off (Pto) Power | 18 hp |
| Engine Type | Diesel |
| Injection Pump Type | Indirect Injection |
| Emissions Compliance | Final Tier 4 |
| Cylinder Liners | Cast-In-Block |
| Compression Ratio | 23:01 |
| Gross Power | 23.9hp |
| Lubrication | Pressurized |
| Cooling System | Water pump |
| Air Cleaner | Dual element |
| Engine Torque At Rated Speed | 53 Nm |
| Displacement | 77.4cu in |
| Aspiration | Natural |
| Fuel Tank Capacity | 6.3gal |
| Bore | 3.2in |
| Stroke | 3.4in |
| Crankcase - With Filter | 2.7 L |
| Battery Size | 500 CCA |
| Alternator (12-V) | 40 amp |
| Starter Size | 1.6 hp |
| Fuel System Type | Indirect Injection |
| Fuel Consumption | 1.5 gal/hr |
| Standard | Rear – 540 rpm, Mid – 2100 rpm |
| Control | Independent |
| Clutch | Wet disc |
| Brake (For Mid And Rear Pto) | Wet disc |
| Cruise Control | Standard |
| Left-Hand Reverser | No |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle Capacity | Front – 612 kg, Rear – 1100 kg |
| Creeper | No |
| Front Tread Range | 95.3 cm |
| Front | R3 Turf – 23×8.50-12, R4 Industrial – 23×8.50-12, R3 Radial – 220/55-R12 |
| Rear | R3 Turf – 31×13.5-15, R4 Industrial – 12-16.5, R3 Radial – 280/70-R16 |
| Maximum Operating Pressure | 2150psi |
| Draft Control Sensing | Position control |
| Pump Rated Output | Steering 13.25 L/min 3.5 gpm, Implement 13.25 L/min, 3.5 gpm, 26.5 L/min , 7.0 gpm |
| Pump Type | Gear |
| Hydraulic Type | Open Center |
| Final Drive Type | Spur Gear |
| Differential Lock | Yes |
| Category | Limited Category 1 |
| Rollover Protective Structure | Type Foldable OSHA, SAE, ASAE |
| Platform - Flat/Straddle | Three-piece semi flat |
