| Ground Clearance | 1.4ft in |
|---|---|
| Ground Clearance - Bumper | 2.3ft in |
| Ground To Top Of Beacon | 13.1ft in |
| Ground To Top Of Hood | 8.6ft in |
| Height - Top Of Cab | 12.1ft in |
| Length To Front Tire | 20.9ft in |
| Wheel Base | 11ft in |
| Net Power | 248hp |
| Operating Weight | 48390lb |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 3.6mph |
| Forward - 2 | 6.3mph |
| Forward - 3 | 11mph |
| Forward - 4 | 19mph |
| Reverse - 1 | 4.1mph |
| Reverse - 2 | 7.2mph |
| Reverse - 3 | 12.5mph |
| Reverse - 4 | 21.5mph |
| Front | Planetary-Fixed |
| Rear | Planetary Oscillating |
| Oscillation Angle | 10 degrees |
| Brakes | Single Disc Wet (enclosed) 4 WHL |
| Fuel Tank | 132.1gal |
| Diesel Exhaust Fluid Tank | 4.2gal |
| Engine Crankcase | 5.3gal |
| Transmission | 13.2gal |
| Ac Oil | 0.1gal |
| Hydraulic Tank Only | 19.8gal |
| Oil Renewal System (Ors) | N/A |
| Lift/Tilt System - Circuit | Pilot operated LS valve with EH |
| Pilot System | Open center, fixed displacement gear |
| Lift/Tilt System | Variable displacement piston |
| Pilot Relief Valve Setting | 3046 psi |
| Steering System - Circuit | Pilot, load sensing |
| Steering System - Pump | Variable displacement piston |
| Relief Valve Setting - Steering | 4003 psi |
| Steering Cycle Times - Low Idle | 8.2 s |
| Maximum Flow At 2,200 Rpm | 38.8 gal/min |
| Engine Model | Cat? C7.1 ACERT? |
| Emissions | Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA |
| Rated Speed | 2200rpm |
| Peak Power Speed | 2200rpm |
| Bore | 4.1in |
| Stroke | 5.3in |
| Displacement | 427.8cu in |
| Peak Torque - 1,400 Rpm | 749lb ft |
| Torque Rise | 26% |
| Operator Sound Level (Iso 6396) | 70 dB(A) |
| Machine Sound Level (Iso 6395) | 110 dB(A) |
| Note (1) | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
| Note (2) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note (3) | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
