| Width Over Tires | 11.39ft in |
|---|---|
| Height To Top Of Cab | 13.42ft in |
| Wheelbase | 14.93ft in |
| Length - With Blade On Ground | 32.42ft in |
| Height - Top Of Cab | 13.46ft in |
| Wheel Base | 14.93ft in |
| Ground Clearance | 1.78ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Net Power | 480.1hp |
| Power Measured @ | 1900rpm |
| Displacement | 964.2cu in |
| Bore | 5.5in |
| Stroke | 6.8in |
| Engine Model | Cat 3456 Diesel |
| Flywheel Power | 481hp |
| Fuel Capacity | 212.2gal |
| Tire Size | 35/65-R33 24PR |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 22.3mph |
| Max Speed - Reverse | 13.5mph |
| Forward - 1 | 4.3mph |
| Forward - 2 | 7.8mph |
| Forward - 3 | 13.8mph |
| Forward - 4 | 24mph |
| Reverse - 1 | 4.5mph |
| Reverse - 2 | 8.1mph |
| Direct Drive - Forward 3 | 13.6mph |
| Direct Drive - Reverse 3 | 14.3mph |
| Direct Drive - Forward 4 | 24.1mph |
| Direct Drive - Forward 2 | 7.7mph |
| Direct Drive - Reverse 2 | 8mph |
| Steering | Meets SAE J1511 FEB94/ISO 5010:1992 stds. |
| Converter Drive - Forward 3 | 12.8mph |
| Converter Drive - Reverse 3 | 13.4mph |
| Direct Drive - Forward 1 | Lock-up Disabled in Forward 1 |
| Converter Drive - Forward 4 | 22.3mph |
| Converter Drive - Forward 1 | 4.2mph |
| Converter Drive - Forward 2 | 7.3mph |
| Direct Drive - Reverse 1 | 4.5mph |
| Converter Drive - Reverse 1 | 4.4mph |
| Converter Drive - Reverse 2 | 7.7mph |
| Reverse - 3 | 14.3mph |
| Number Of Forward Speeds | 4 |
| Number Of Reverse Speeds | 3 |
| Operating Weight | 103849lb |
| Standard Tire Size | 35/65-33 |
| Tires | Four choices with others on request. |
| Blade Capacity | 10.6yd3 |
| Blade Width | 16.7ft in |
| Relief Valve Setting | 4206 psi |
| Blade Height | 4.9ft in |
| Front | Fixed axle |
| Rear | Oscillating ?13 degrees |
| Brakes | Meet SAE/ISO 3450 1996 |
| Cooling System | 25gal |
| Crankcase | 15.9gal |
| Hydraulic Tank | 37gal |
| Fuel Tank - Standard | 210gal |
| Transmission | 19gal |
| Rops/Fops | Meets SAE and ISO standards |
| Cab | ROPS/FOPS is standard |
| Sound Performance Levels | Meets ANSI/SAE, SAE and ISO standards |
| Straight Blade - Capacity | 10.4yd3 |
| Blade Capacities | 7.9 to 22.2 m3 10.3 to 29 yd3 |
| Moldboard Length | 18.7ft in |
| Maximum Lift Above Ground | 4.2ft in |
| Straight Blade - Height | 57.5ft in |
| Straight Blade - Maximum Tilt | 50ft in |
| Straight Blade - Weight | 7047lb |
| Universal Blade - Capacity | 14.6yd3 |
| Coal Blade - Capacity | 29yd3 |
| Universal Blade - Height | 57.5ft in |
| Coal Blade - Overall Width | 223.5ft in |
| Coal Blade - Height | 77ft in |
| Coal Blade - Digging Depth | 18.3ft in |
| Coal Blade - Ground Clearance | 46.4ft in |
| Coal Blade - Maximum Tilt | 58.3ft in |
| Universal Blade - Weight | 10042lb |
| Coal Blade - Weight | 9450lb |
