| Height To Top Of Cab | 18.34ft in |
|---|---|
| Wheelbase | 19.33ft in |
| Ground Clearance | 2.25ft in |
| Length - With Blade On Ground | 44ft in |
| Wheel Base | 19.25ft in |
| Height - Top Of Rops | 18.25ft in |
| Height - Top Of Exhaust Pipe | 17.18ft in |
| Height - Top Of Hood | 13ft in |
| Number Of Cylinders | 12 |
| Engine Make | 2236 |
| Gross Power | 907hp |
| Net Power | 800.6hp |
| Power Measured @ | 1750rpm |
| Rated Speed | 1750rpm |
| Net Torque | 3129lb ft |
| Torque Rise | 30% |
| Displacement | 1958.9cu in |
| Aspiration | turbocharged |
| Bore | 5.7in |
| Stroke | 6.4in |
| Engine Model | Cat C32 ACERT |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (2) | Net torque rise meets SAE J139. |
| Note (3) | No engine derating required up to 3050 m (10,000 ft) altitude. |
| Peak Torque - 1,200 Rpm | 3139lb ft |
| Fuel Capacity | 412.7gal |
| Cooling System Fluid Capacity | 52.9gal |
| Engine Oil Capacity | 31.8gal |
| Transmission Fluid Capacity | 44.7gal |
| Front Diff Fluid Capacity | 97.5gal |
| Rear Diff Fluid Capacity | 90.4gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 150amps |
| Tire Size | 45/65 R45 |
| Transmission Type | Planetary power shift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 13.2mph |
| Max Speed - Reverse | 14.7mph |
| Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
| Direct Drive - Forward 3 | 14.2mph |
| Direct Drive - Reverse 3 | 15.6mph |
| Direct Drive - Forward 2 | 8.1mph |
| Direct Drive - Reverse 2 | 8.9mph |
| Total Steering Angle | 86degrees |
| Converter Drive - Forward 3 | 13.2mph |
| Converter Drive - Reverse 3 | 14.6mph |
| Direct Drive - Forward 1 | Lock Up Disabled |
| Converter Drive - Forward 1 | 4.4mph |
| Converter Drive - Forward 2 | 7.7mph |
| Direct Drive - Reverse 1 | 5mph |
| Converter Drive - Reverse 1 | 4.8mph |
| Converter Drive - Reverse 2 | 8.4mph |
| Relief Valve Setting | 5004 psi |
| Minimum Turning Radius | 31ft in |
| Operating Weight | 224254lb |
| Blade Capacity | 33.3yd3 |
| Blade Width | 20.8ft in |
| Blade Height | 7.2ft in |
| Front | Fixed |
| Rear | Oscillating at 10 degrees |
| Brakes | Meets ISO 3540:2011 |
| Cooling System | 53gal |
| Crankcase | 32gal |
| Fuel Tank - Standard | 413gal |
| Transmission | 45gal |
| Air Conditioning | Standard air conditioning system contains environmentally friendly R134a refrigerant |
| Rops | ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria. |
| Fops | FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria. |
| Cab - Rops/Fops (2) | SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005 |
| Cab - Rops/Fops (1) | Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan. |
| Sound Performance (4) | The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A). |
| Sound Performance (3) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
| Sound Performance (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A). |
| Sound Performance (1) | The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
| Blade Capacities | 25 to 45 m (33 to 58 yd) |
| Serial Number Prefix | KK6 |
