| Ground Clearance | 15.6in |
|---|---|
| Maximum Reach | 5ft in |
| Steering Angle - Left/Right | 80 degrees |
| Turning Radius - Over Bucket | 12.9ft in |
| Departure Angle - Degrees | 30 degrees |
| Note (1) | *Vary with bucket size. |
| Dig Depth | 8in |
| Note (2) | **Vary with tire size. |
| Tire Gauge | 4.3ft in |
| Fork Depth Above Ground | 2in |
| Overall Length - With Bucket* | 15.4ft in |
| Wheel Base | 5.9ft in |
| Overall Length - With Forks | 17ft in |
| Cab Height | 8.2ft in |
| Hinge Pin At Maximum Height | 10.1ft in |
| Turning Radius - Inside Tire | 5.4ft in |
| Load Over Height | 9.2ft in |
| Reach @ Ground Level | 3.2ft in |
| Machine Width** | 5.6ft in |
| Articulation Angle | 40 degrees |
| Maximum Dump Height | 7.5ft in |
| Width - Over Bucket* | 5.8ft in |
| Maximum Fork Height | 9.81ft in |
| Net Power | 40hp |
| Displacement | 147cu in |
| Bore | 3.4in |
| Stroke | 4in |
| Engine Model | Cat C2.4 |
| Maximum Gross Power | 42hp |
| Operating Weight | 9060lb |
| Travel Speed | 10mph |
| Bucket Capacities | 0.6-1.0 m3 (0.8-1.3 yd3) |
| Hydraulic Cycle Time - Dump | 0.8 s |
| Hydraulic Cycle Time - Lift | 4.8 s |
| Main Relief | 2988 psi |
| 3rd Auxiliary Flow | 14 gal/min |
| Cooling System | 3gal |
| Fuel Tank | 11.4gal |
| Hydraulic System | 6.3gal |
| Engine Oil | 2.4gal |
| Rops | ISO 3471:2008 |
| Fops | ISO 3449:2000 Level I |
| Breakout Force | 5170lb |
| Rated Bucket Capacity | 0.8yd3 |
| Tire Size | 33 degrees 15.5-16.5, 12PR |
| Rack Back - Transport Position | 52 degrees |
| Straight Tipping Load - Bucket | 5070lb |
| Note | Based on ISO 7546: 1983 and rated operating loads at full turn and standard linkage, without additional counterweight |
| Bucket Type | Light Material |
| Rated Capacity | 1.3yd3 |
| Dump Height | 85in |
| Maximum Material Density | 1480 lb/yd |
| Bucket Width | 74in |
