| Ground Clearance | 10in |
|---|---|
| Wheel Base | 6.42ft in |
| Steering Angle | 80 degrees |
| Departure Angle - Degrees | 30 degrees |
| Dig Depth | 6in |
| Width - Over Bucket* | 5.83ft in |
| Dump Angle At Maximum Height | 40 degrees |
| Fork Depth Above Ground | 2in |
| Tire Gauge | 4.33ft in |
| Fork Height At Maximum Reach | 4.67ft in |
| Overall Length - With Bucket* | 15.75ft in |
| Fork Reach At Maximum Height | 2ft in |
| Turning Radius - Over Bucket | 13.17ft in |
| Cab Height | 8.25ft in |
| Hinge Pin At Maximum Height | 10.08ft in |
| Overall Length - With Forks | 17.08ft in |
| Load Over Height | 9.17ft in |
| Turning Radius - Inside Tire | 5.92ft in |
| Machine Width** | 5.58ft in |
| Reach @ Ground Level | 2.67ft in |
| Maximum Dump Height | 7.5ft in |
| Articulation Angle | 40 degrees |
| Maximum Fork Height | 9.83ft in |
| Maximum Reach | 4.5ft in |
| Reach At Maximum Dump Height* | 2.33ft in |
| Gross Power | 42hp |
| Displacement | 147cu in |
| Bore | 3.4in |
| Stroke | 4in |
| Engine Model | Cat C2.4 |
| Maximum Gross Power | 42hp |
| Travel Speed | 12.4mph |
| Operating Weight | 9414lb |
| Bucket Capacities | 0.6-1.0 m (0.8-1.3 yd) |
| Hydraulic Cycle Time - Dump | 0.7 s |
| Hydraulic Cycle Time - Lift | 4.4 s |
| Main Relief | 3481 psi |
| 3rd Auxiliary Flow | 14 gal/min |
| Cooling System | 3gal |
| Fuel Tank | 11.4gal |
| Hydraulic System | 6.3gal |
| Engine Oil | 2.4gal |
| Rops | ISO 3471:2008 |
| Fops | ISO 3449:2005 Level I |
| Breakout Force | 6160lb |
| Rated Bucket Capacity | 0.8yd3 |
| Tire Size | 33 15.5-16.5, 12 PR |
| Rack Back - Transport Position | 51 degrees |
| Note (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
| Note (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
| Note (3) | ***Manual quick coupler, precleaner hood. |
| Note (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride |
| Straight Tipping Load - Bucket | 6415lb |
| Note | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
| Bucket Type | Light Material |
| Rated Capacity | 1.3yd3 |
| Dump Height | 85in |
| Maximum Material Density | 1989 lb/yd |
| Bucket Width | 74in |
