| Dump Clearance At Max Raise | 7.95ft in |
|---|---|
| Bucket Capacity - Heaped | 0.8yd3 |
| Length With Bucket On Ground | 16.54ft in |
| Width Over Tires | 6.14ft in |
| Height To Top Of Cab | 8.8ft in |
| Wheelbase | 6.5ft in |
| Hinge Pin - Max Height | 10.25ft in |
| Reach At Max Lift And Dump | 2.6ft in |
| Tread Width | 54.96in |
| Engine Make | 2236 |
| Engine Model | 3044C |
| Net Power | 68hp |
| Gross Power | 75hp |
| Power Measured @ | 2600rpm |
| Iso 9249 Rating | 71hp |
| Eec 80/1269 Rating | 71hp |
| Sae J1349 Rating | 71hp |
| Fuel Capacity | 19.6gal |
| Engine Oil Fluid Capacity | 2.6gal |
| Cooling System Fluid Capacity | 5.5gal |
| Transmission Fluid Capacity | 2.6gal |
| Static Tipping Weight | 7546lb |
| Operating Voltage | 12V |
| Alternator Supplied Amperage | 90amps |
| Rear Axle Oscillation | 22degrees |
| Tire Size | 12.5×18 |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12mph |
| Max Speed - Reverse | 12mph |
| Operating Weight | 10912lb |
| Bucket Width | 6.2ft in |
| Relief Valve Setting | 3408.4psi |
| Pump Flow Capacity | 18gal/min |
| Raise Time | 4.5sec |
| Dump Time | 1.5sec |
| Lower Time | 3.2sec |
| Pump Type | Gear |
| Hydraulic Cycle Time - Dump | 1.5 |
| Hydraulic Cycle Time - Lift | 4.5 |
| Main Relief | 3400 psi |
| 3rd Valve Flow | 17.7 gal/min |
| Breakout Force | 10340lb |
| Rated Bucket Capacity | 1.1yd3 |
| Dump Height At Full Lift | 8ft in |
| Articulation | 40degrees |
| Oscillation +/- | 11degrees |
| Rack Back - Transport Position | 53degrees |
| Hydraulic Lift Capacity | 9100lb |
| Straight Tipping Load - Bucket | 7546lb |
| Reach - Without Teeth | 2.8ft in |
| Cooling System | 5.5gal |
| Fuel Tank | 19.6gal |
| Hydraulic System | 17.5gal |
| Engine Oil | 2.6gal |
| Rops | meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986 |
| Fops | meets the following criteria: SAE J231 JAN81, ISO 3449:1992 |
| Sound | Sound level is below 75 dB(A) |
| Side Dump Bucket | 3000 lb/yd |
| Bore | 3.7in |
| Stroke | 4.8in |
| Transmission Type | Closed-loop, two-speed hydrostatic single-path transmission. |
| Axle And Final Drives | fixed front axle with limited slip differential and planetary ge |
| Service And Parking Brake | Are combined in a single, dry-disc driveline brake |
| Brake Standards | Brake meets ISO 3450:1996 |
