| Reach - Level Arm | 4.75ft in |
|---|---|
| Width - Tread Center | 5.08ft in |
| Articulation Angle | 39 degrees |
| Height - Ground To Cab | 8.58ft in |
| Length - Overall With Bucket | 18.75ft in |
| Clearance - Full Lift | 10.75ft in |
| Turning Radius - Inside Tire | 6.67ft in |
| Clearance - Level Arm | 4.92ft in |
| Width Over Tires | 6.5ft in |
| Clearance - Level Bucket | 10.33ft in |
| Length - Overall With Forks | 20ft in |
| Departure Angle | 33 degrees |
| Length - Wheel Base | 7.08ft in |
| Dig Depth | 6in |
| Turning Radius - Over Bucket | 14.75ft in |
| Reach - Bucket At 45 Degrees | 3.92ft in |
| Dump Angle At Full Lift | 45 degrees |
| Fork Dig Depth | 0.8in |
| Fork Reach At Full Lift | 1.92ft in |
| Reach - Ground | 2.92ft in |
| Height - Bucket Pin | 10.5ft in |
| Width - Bucket | 6.75ft in |
| Height - Ground Clearance | 12.96in |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards. |
| Maximum Gross Power - Sae J1995 | 74hp |
| Maximum Net Power - Sae J1349 | 68hp |
| Maximum Net Power - Iso 9249 | 69hp |
| Maximum Gross Power | 73hp |
| Operating Weight | 14402lb |
| Bucket Capacities | ISO Coupler – 0.9-1.5 m, SSL Style Coupler – 1.2-2.0 yd |
| Hydraulic Cycle Time - Dump | 1.3 seconds |
| Main Relief - 3rd Aux Flow | 3400 psi |
| Hydraulic Cycle Time - Lift | 5.2 seconds |
| Hydraulic Cycle Time - Lower | 3.2 seconds |
| Cooling System | 4.5gal |
| Fuel Tank | 20.6gal |
| Hydraulic System | 18.5gal |
| Engine Oil | 3gal |
| Bucket Width | 81in |
| Maximum Material Density | 4060 lb/yd |
| Rated Capacity | 1.2yd3 |
| Dump Height | 110in |
| Rated Bucket Capacity | 1.5yd3 |
| Tire Size | 400/70 R20 |
| Breakout Force - Bucket | 10215lb ft |
| Note | Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, SSL coupler and general purpose bucket (GP). |
| Speed 1 | 6.2mph |
| Speed 2 | 12.4mph |
| High Speed | 21.7mph |
