| Fork Depth Below Ground | 2.8in |
|---|---|
| Ground Clearance | 13in |
| Overall Length - With Bucket* | 18.9ft in |
| Cab Height | 8.7ft in |
| Departure Angle - Degrees | 33 |
| Fork Depth Above Ground | 1.2in |
| Hinge Pin At Maximum Height | 11.2ft in |
| Load Over Height | 10.5ft in |
| Maximum Dump Height | 8.31ft in |
| Maximum Fork Height | 10.8ft in |
| Maximum Reach | 4.7ft in |
| Articulation Angle - Degrees | 39 |
| Overall Length - With Forks | 20.2ft in |
| Reach At Ground Level | 3ft in |
| Tire Gauge | 5.2ft in |
| Turning Radius - Inside Tire | 6.8ft in |
| Wheel Base | 7.1ft in |
| Width - Over Bucket* | 6.75ft in |
| Net Power | 74hp |
| Displacement | 201cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
| Engine Model | Cat C3.3B DIT* |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Maximum Gross Power - Sae J1995 | 74hp |
| Maximum Net Power - Sae J1349 | 68hp |
| Maximum Gross Power - Iso 14396 | 73hp |
| Maximum Net Power - Iso 9249 | 69hp |
| Maximum Gross Power | 73hp |
| Maximum Net Torque - Sae J1349 | 189lb ft |
| Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
| Forward - Range 1 | 6mph |
| Forward - Range 2 | 12mph |
| Forward - High Range | 22mph |
| Reverse - Range 1 | 6mph |
| Reverse - Range 2 | 12mph |
| Reverse - High Range | 22mph |
| Nominal Flow - Steering Pump | 12 gal/min |
| Operating Weight | 14032lb |
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow h |
| Option 1 | 360/80 R20 TRI2 Nokian |
| Option 2 | 375/75 R20 XZSL Michelin |
| Option (3) | 400/70 R20 XMCL Michelin |
| Option (4) | 400/70 R20 Bibload Michelin |
| Option (5) | 405/70 R20 SPT9 Dunlop |
| Option (6) | 12.5-20 ATU Firestone |
| Bucket Capacities | 0.9 m3-1.5 m3 (1.2 yd3-2.0 yd3) |
| Bucket Capacities - Iso Coupler | 0.9-1.5 m3 |
| General Purpose | 1.1-1.3 m3 (1.44-1.7 yd3) |
| Light Material | 2yd3 |
| Hydraulic Cycle Time - Dump | 1.3 s |
| Main Relief - 3rd Aux Flow | 3400 psi |
| Hydraulic Cycle Time - Lift | 5.2 s |
| Hydraulic Cycle Time - Rackback | 2.1 s |
| Hydraulic Cycle Time - Lower | 3.2 s |
| Full Turn Tipping Load | 8311lb |
| Cooling System | 4.4gal |
| Fuel Tank | 20.6gal |
| Hydraulic Tank | 12.2gal |
| Engine Crankcase | 3gal |
| Transmission - Gear Box | 2.9gal |
| Hydraulic System | 18.5gal |
| Engine Oil | 3gal |
| Rops | SAE J1040 MAY94, ISO 3471-1994 |
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
| Maximum Flow - Implement Pump | 22 gal/min |
| Boost Flow Maximum Pressure | 3191 psi |
| Bucket Width | 81in |
| Maximum Material Density | 3251 lb/yd |
| Rated Capacity | 1.2yd3 |
| Dump Height | 104in |
| Rated Bucket Capacity | 1.4yd3 |
| Tire Size | 405/70 R20 |
| Straight Tipping Load - Bucket | 10207lb |
| Breakout Force - Bucket | 10566lb ft |
| Rack Back - Transport Position | 52 |
| Speed 1 | 6.2mph |
| Speed 2 | 12.4mph |
| High Speed | 21.7mph |
| Vinyl Suspension Seat | Standard |
| Fixed Steering Column | Standard |
| Air Conditioner | Optional |
| Machine Security System | Optional |
| Cat Radio/Cd/Mp3/Wma/Aux | Optional |
| Adjustable Internal Mirror | Standard |
| Rear Blind | Optional |
| Adjustable Steering Column | Standard |
| Heated Rear Window | Standard |
| Coat Hook | Standard |
| External Knock Back Mirrors | Standard |
| Cup Holder | Standard |
| Lockable Storage Box | Standard |
| Sun Visor | Standard |
| Two Access Doors | Standard |
| Left Window - Sliding | Standard |
| Cabin Light | Standard |
| Heater | Standard |
| Right Window - Sliding | Standard |
| Height - Ground To Cab | 8.7ft in |
| Height - Ground Clearance | 1.1ft in |
| Length - Wheel Base | 7.1ft in |
| Length - Overall | 19ft in |
| Reach - Bucket At 45 Degrees | 2.9ft in |
| Dig Depth | 4.2in |
| Clearance - Level Bucket | 10.5ft in |
| Height - Bucket Pin | 11.2ft in |
| Width - Bucket | 6.8ft in |
| Width - Tread Center | 5.1ft in |
| Turning Radius - Over Bucket | 14.9ft in |
| Machine Width** | 6.5ft in |
| Dump Angle At Full Lift | 45 degrees |
| Departure Angle | 33 degrees |
| Articulation Angle | 39 degrees |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
