| Carry Height | 1.5ft in |
|---|---|
| Digging Depth | 3.8in |
| Dump Angle At Maximum Lift | 49degrees |
| Height - Center Of Axle | 2.21ft in |
| Height - Top Of Rops/Fops | 10.9ft in |
| Length - Rear Axle To Bumper | 6.5ft in |
| Overall Height - Bucket Raised | 16.8ft in |
| Overall Length | 24.66ft in |
| Rack Back Angle - Carry | 45degrees |
| Rack Back Angle - Maximum Lift | 54degrees |
| Wheel Base | 9.81ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C7.1 ACERT |
| Net Power | 152hp |
| Gross Power | 154hp |
| Max Torque | 580lb ft |
| Displacement | 402cu in |
| Net Torque | 551lb ft |
| Bore | 4in |
| Stroke | 5in |
| Eec 80/1269 | 156hp |
| Rated Net Power | 154hp |
| Sae J1349 | 154hp |
| Iso 9249 (1997) | 156hp |
| Fuel Capacity | 51.5gal |
| Cooling System Fluid Capacity | 8.5gal |
| Transmission Fluid Capacity | 2.2gal |
| Rear Axle/Diff Fluid Capacity | 6.9gal |
| Tire Size | 20.5 |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 25mph |
| Max Speed - Reverse | 25mph |
| Forward - 1 | 8mph |
| Reverse - 1 | 8mph |
| Steering Angle - Each Direction | 40degrees |
| Steering Cylinder, Two, Bore | 2.8in |
| Steering Articulation | 40degrees |
| 2 | 8mph |
| 3 | 17mph |
| 4 | 25mph |
| Operating Weight | 30479lb |
| Size | 20.5 R25 Radial (L-3) |
| Bucket Capacities | 2.1 m3 – 5.0 m3 2.7 yd3 – 6.5 yd3 |
| Relief Valve Setting | 3626psi |
| Pump Flow Capacity | 50gal/min |
| Raise Time | 5.7sec |
| Dump Time | 1.7sec |
| Lower Time | 2.7sec |
| Static Tipping Load - Full Turn | 18444lb |
| Articulation Angle | 40degrees |
| Cooling System | 7.9gal |
| Fuel Tank | 51.5gal |
| Crankcase | 5.3gal |
| Hydraulic Tank | 23.8gal |
| Transmission | 2.2gal |
| Front | 6.9gal |
| Rear | 6.6gal |
| Rops | SAE J1040 MAY94, ISO 3471-1994 |
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
| Pump Flow - Implement Pump | 50 gal/min |
| Maximum Working Pressure | 3626 psi |
| Raise | 5.1 s |
| Dump | 1.5 s |
| Lower, Empty, Float Down | 2.7 s |
| Total | 9.3 s |
| Bore (1) | 4.7in |
| Stroke (1) | 28.7in |
| Bore (2) | 5.9in |
| Stroke (2) | 21.9in |
| Hydraulic Cycle Time | 9.3 sec |
