Caterpillar 930M Aggregate Handler Wheel Loader

SKU: 930M Aggregate Handler Category: ,
Displacement

427cu in

Bore

4in

Stroke

5in

Emissions

Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.

Engine Model

Cat? C7.1 ACERT?

Note (4)

Spark arrester performance as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Maximum Gross Power

164hp

Rated Net Power

157hp

Operating Weight

31144lb

Front Axle

Fixed

Rear Axle

Oscillating

Brakes - Parking

Spring applied, hydraulically released

Brakes - Service

Inboard wet disc

Front Axle - Traction Aid

Locking differential (standard)

Note

* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Maximum Flow - Steering Pump

34 gal/min

Forward And Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward And Reverse - Range 2

8mph

Forward And Reverse - Range 3

17mph

Forward And Reverse - Range 4

25mph

Bucket Capacities

2.5-2.7 m3 (3.3-3.5 yd3)

Full Turn Tip Load

19563lb

Cooling System

7.9gal

Fuel Tank

51.5gal

Hydraulic Tank

23.8gal

Engine Crankcase

5.3gal

Transmission - Gear Box

2.2gal

Diesel Exhaust Fluid (Def) Tank

5gal

Front Axles

6.9gal

Rear Axles

6.6gal

Rops

ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II

Declared Sound Levels

Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*

Maximum Flow - Implement Pump

50 gal/min

Note (1)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Note (3)

* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Relief Pressure - Tilt Cylinder

4061 psi