| Dump Clearance At Max Raise | 11.33ft in |
|---|---|
| Breakout Force | 85068lb |
| Bucket Width | 12.5ft in |
| Bucket Capacity - Struck | 6.9yd3 |
| Bucket Capacity - Heaped | 8.33yd3 |
| Length With Bucket On Ground | 40.08ft in |
| Width Over Tires | 11.75ft in |
| Height To Top Of Cab | 13.42ft in |
| Wheelbase | 14.83ft in |
| Hinge Pin - Max Height | 19.18ft in |
| Reach At Max Lift And Dump | 6.66ft in |
| Ground Clearance | 1.8ft in |
| Rack Back Angle - Maximum Lift | 45degrees |
| Wheel Base Length | 14.93ft in |
| Height - Top Of Air Cleaner | 11.1ft in |
| C-Pin Height | 3.31ft in |
| Dig Depth | 0.74ft in |
| Height - Spillguard | 17.82ft in |
| B-Pin Height | 19.2ft in |
| Height - Top Of Cab | 13.54ft in |
| Height - Top Of Exhaust Stack | 13.49ft in |
| Height - Top Of Hood | 10.35ft in |
| Rack Back Angle - Carry | 56.5degrees |
| Rack Back Angle - Ground | 47.8degrees |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Net Power | 501hp |
| Gross Power | 555hp |
| Power Measured @ | 1800rpm |
| Displacement | 1104.5cu in |
| Bore | 5.7in |
| Stroke | 7.2in |
| Net Power - Iso 9249 | 501hp |
| Engine Model | Cat C18 ACERT |
| Flywheel Power | 501hp |
| Net Power - Iso 14396 | 540hp |
| Gross Power - Iso 3046-2 | 520hp |
| Net Power - Eec 80/1269 | 501hp |
| Operating Weight | 109249lb |
| Fuel Capacity | 188gal |
| Engine Oil Fluid Capacity | 15.9gal |
| Cooling System Fluid Capacity | 27.2gal |
| Transmission Fluid Capacity | 18.5gal |
| Rear Axle/Diff Fluid Capacity | 49gal |
| Static Tipping Weight | 76776lb |
| Turning Radius | 28ft in |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 100amps |
| Rear Axle Oscillation | 26degrees |
| Tire Size | 35/65 |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24mph |
| Max Speed - Reverse | 15.6mph |
| Direct Drive - Forward 3 | 13.6mph |
| Direct Drive - Reverse 3 | 15.6mph |
| Direct Drive - Forward 4 | 24mph |
| Direct Drive - Forward 2 | 7.7mph |
| Direct Drive - Reverse 2 | 8.8mph |
| Steering | Meets SAE and ISO standards |
| Total Steering Angle | 86degrees |
| Converter Drive - Forward 3 | 12.9mph |
| Converter Drive - Reverse 3 | 14.7mph |
| Direct Drive - Forward 1 | Lock-up disables |
| Converter Drive - Forward 4 | 22.3mph |
| Converter Drive - Forward 1 | 4.2mph |
| Converter Drive - Forward 2 | 7.3mph |
| Direct Drive - Reverse 1 | 4.9mph |
| Converter Drive - Reverse 1 | 4.7mph |
| Converter Drive - Reverse 2 | 8.4mph |
| Maximum Bucket Capacity | 10yd3 |
| Bucket Capacities | 6.4 m3-7.7 m3 8.3 yd3-10 yd3 |
| Pump Flow Capacity | 130gal/min |
| Raise Time | 9.4sec |
| Dump Time | 2.4sec |
| Lower Time | 3.8sec |
| Front | Fixed |
| Rear | Oscillating ?13 degrees |
| Brakes | Meet SAE ISO 3450:1996 |
| Tipping Load - Straight | 84038lb |
| Attachment Type | Cat quick coupler and forks |
| Hinge Pin Height, Unloaded | 16.2ft in |
| Overall Length | 39.9ft in |
| Turning Radius - Sae Carry | 31ft in |
| Rated Payload | 27557.8lb |
| Cooling System | 27.2gal |
| Fuel Tank | 188gal |
| Crankcase | 15.9gal |
| Transmission | 18.5gal |
| Hydraulic System Factory Fill | 124.2gal |
| Hydraulic System - Tank Only | 70.5gal |
| Raise | 9.4 s |
| Dump | 2.4 s |
| Total Hydraulic Cycle Time | 15.6 s |
| Lower Float Down - Empty | 3.8 s |
| Cab - Rops/Fops | Meets SAE and ISO standards. |
| Sound Performance | Meets ANSI, SAE and ISO standards |
| Relief Valve Setting | 5075 psi |
| Relief Valve Setting - Low Idle | 348.1 psi |
