| Dump Clearance At Max Raise | 6.46ft in |
|---|---|
| Bucket Width | 3.67ft in |
| Ground Clearance | 0.63ft in |
| Length With Bucket On Ground | 11.22ft in |
| Width Over Tires | 3.45ft in |
| Height To Top Of Cab | 7.19ft in |
| Wheelbase | 4.43ft in |
| Hinge Pin - Max Height | 8.88ft in |
| Reach At Max Lift And Dump | 1.3ft in |
| Length Of Machine* | 397.6in |
| Basic Blade Width | 140in |
| Maximum Height | 132in |
| Width | 97.6 in |
| Number Of Cylinders | 6 |
| Engine Make | 2348 |
| Net Power | 23.3hp |
| Power Measured @ | 2800rpm |
| Displacement | 567.5cu in |
| Bore | 4.5in |
| Stroke | 5.9in |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV |
| Engine Model | Cat C9.3 |
| Net Power - Eec 80/1269 | 250hp |
| Maximum Torque | 827lb ft |
| Net Power - Iso 9249/Sae J1349 | 250hp |
| Base Power (1st Gear) - Net | 177hp |
| Standard Capability | 109degrees |
| Torque Rise - Iso 9294 | 40% |
| Operating Weight | 3911.1lb |
| Fuel Capacity | 6.9gal |
| Static Tipping Weight | 1929.1lb |
| Turning Radius | 6.9ft in |
| Operating Voltage | 12V |
| Tire Size | 27×10.5-15 |
| Max Speed - Forward | 10.5mph |
| Max Speed - Reverse | 10.5mph |
| Relief Valve Setting | 4640psi |
| Pump Flow Capacity | 20.9gal/min |
| Cutting Edge | 6 in |
| Blade Width | 12ft in |
| Arc Radius | 16.3in |
| Throat Clearance | 6.5in |
| End Bit | 6in |
| Fuel Tank | 100gal |
| Hydraulic System | 14.5gal |
| Cooling System | 15gal |
| Def Tank* | 3.3gal |
| Circle Drive | 1.8gal |
| Engine Crankcase | 7.9gal |
| Note | *Typically equipped with push block and ripper. |
| Weight | 42.4lb |
| All-Wheel Drive (Awd) Weight | 44.7lb |
| Circle Centershift - Right | 28.6in |
| Circle Centershift - Left | 29.6in |
| Moldboard Sideshift - Right | 20.1in |
| Moldboard Sideshift - Left | 26.1in |
| Blade Tip Range Forward | 40 degrees |
| Blade Tip Range Backward | 5 degrees |
| Maximum Lift Above Ground | 18.9in |
| Maximum Depth Of Cut | 28.9in |
