| Dump Clearance At Max Raise | 10.8ft in |
|---|---|
| Arm Length | 10.4ft in |
| Breakout Force | 53954.15lb |
| Bucket Capacity - Heaped | 7.8yd3 |
| Bucket Width | 11.3ft in |
| Digging Depth | 4ft in |
| Ground Clearance | 1.12ft in |
| Length With Bucket On Ground | 32.9ft in |
| Height To Top Of Cab | 12.3ft in |
| Wheelbase | 12.1ft in |
| Hinge Pin - Max Height | 15.3ft in |
| Reach At Max Lift And Dump | 4.8ft in |
| Alternator | 28/180 (V/A) |
| Voltage | 24 VV |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 180 Ah |
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 6 |
| Engine Model | D936 A7 |
| Net Power | 349hp |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
| Gross Power | 353hp |
| Power Measured @ | 1800rpm |
| Max Torque | 1450 lb ft |
| Displacement | 642cu in |
| Torque Measured @ | 1100rpm |
| Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Bore | 4.8in |
| Stroke | 6in |
| Operating Weight | 71870lb |
| Fuel Capacity | 132gal |
| Engine Oil Fluid Capacity | 10.6gal |
| Cooling System Fluid Capacity | 19.3gal |
| Hydraulic Fluid Capacity | 25.1gal |
| Rear Axle/Diff Fluid Capacity | 15.9gal |
| Static Tipping Weight | 47620lb |
| Turning Radius | 27.5ft in |
| Tire Size | 29.5R25 L3 |
| Max Speed - Forward | 20.5mph |
| Max Speed - Reverse | 20.5mph |
| Max Operating Pressure | 4786 psi |
| Relief Valve Setting | 4351.2psi |
| Pump Flow Capacity | 108gal/min |
| Raise Time | 6.5sec |
| Dump Time | 3sec |
| Lower Time | 4sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
