| Windguard Description | 13 rods |
|---|---|
| Standard Pickup Lift | Manual |
| Sweep Width Inside | 74.81in |
| Sweep Width On Flare | 79.93in |
| Tine Spacing | 2.64in |
| Width Between Outside Tines | 67.49in |
| Number Of Tine Bars | 6 |
| Number Of Tines | 156 |
| Optional Pickup Lift | Hydraulic |
| Pickup Position | Offset to right side |
| Pickup Protection | V-belt slippage & lost motion reel drive |
| Length Without Bale Chute | 205in |
| Max. Height | 70.99in |
| Tractor Pto Power Required | 75hp |
| Width | 10ft in |
| Length With Bale Chute | 247.01in |
| Tying Mechanism Type | Knotter |
| Tying Twine Capacity | 8 balls |
| Tying Wire Capacity | No wire |
| Flywheel Diameter | 22.1in |
| Flywheel Weight | 247lb |
| Pto Driveline | Std three-joint, Category 6 |
| Pto Speed | 540rpm |
| Main Drive Protection | Shearbolt, overrunning & slip clutches |
| Literature Number | CIH7180801 |
| Literature Date | July, 2008 |
| Document Number | 86624842 |
| Document Date | 10/1/2001 |
| Manufacturing Status | Current |
| First Entry Date | 8/21/2008 |
| Revision Date | 2/27/2012 |
| Bale Length Range (In,Mm) | 12 to 52 (305 to 1321) |
| Density Control, Standard | Adj spring loaded tension rails |
| Density Control, Optional | No option |
| Bale Thrower Compatible | BTX11 available (80 lb bale) |
| Feeder Description | Rotary feeder w/ packer |
| Feeder Opening Sq In (Sq Cm) | 283 (1826), right side entry |
| Weight With Twine Tie | 3714.8lb |
| Standard Tireleft | 31 x 13.50 – 15, 6PR |
| Standard Tire Right | 27 x 9.50 – 15, 6PR |
| Weight With Wire Tie | 3851.5lb |
| Plunger Speed (Strokes/Min) | 79 |
| Plunger Stroke | 30in |
