| Height - Bottom Of Ladder | 1.52ft in |
|---|---|
| Wheel Base | 10.99ft in |
| Width - Over Drums | 10.64ft in |
| Height - Rear Bumper | 2.53ft in |
| Height - Top Of Cab | 10.98ft in |
| Height - Top Of Exhaust Pipe | 126.96in |
| Height - Top Of Hood | 94.32in |
| Length - With Blade On Ground | 22.46ft in |
| Ground Clearance | 1.28ft in |
| Turning Radius Blade - Outside | 21.2ft in |
| Turning Radius Blade - Inside | 9.7ft in |
| Cylinders | 6 |
| Net Power | 232hp |
| Gross Power | 253hp |
| Displacement | 537cu in |
| Torque Rise | 30% |
| Bore | 4.4in |
| Stroke | 5.9in |
| Engine Model | Cat C9 ACERT |
| Eec 80/1269 | 235hp |
| Sae J1349 | 232hp |
| Iso 3046-2 | 232hp |
| Iso 9249 | 235hp |
| Operating Weight | 45765lb |
| Forward - 1 | 3.9mph |
| Forward - 2 | 6.7mph |
| Forward - 3 | 11mph |
| Reverse - 1 | 4.4mph |
| Reverse - 2 | 7.6mph |
| Reverse - 3 | 12.2mph |
| Tips Per Row | 12 |
| Outside Diameter | 4.7ft in |
| Drum Diameter | 3.4ft in |
| Drum Width | 3.3ft in |
| Tips Per Wheel | 60 |
| Relief Valve Setting | 2255 psi |
| Front | Fixed |
| Rear | Oscillating 12 degrees |
| Lift Cylinder Bore X Stroke | 101.6 mm x 627 mm 3.99 in x 24.68 in |
| Cooling System | 14.5gal |
| Fuel Tank | 117.8gal |
| Crankcase | 9gal |
| Hydraulic Tank | 23.2gal |
| Transmission | 13.2gal |
| Rops/Fops | Meet SAE and ISO standards |
| Standards | Meet required sound standards |
| Blade Tip Angle - Total | 59.2degrees |
| Moldboard Length | 12ft in |
| Height - Including Cutting Edge | 2.9ft in |
| Maximum Depth Of Cut | 0.8ft in |
| Maximum Lift Above Ground | 2.7ft in |
| Width - Over End Bits | 12.3ft in |
| Weight | 44853lb |
| Height | 11ft in |
| Width | 12ft in |
| Depth | 22.5ft in |
